ADS5463
ADS5463-EP
www.ti.com ......................................................................................................................................... SGLS382C –NOVEMBER 2006–REVISED OCTOBER 2009
12-BIT, 500-MSPS ANALOG-TO-DIGITAL CONVERTER
Check for Samples :ADS5463-EP
1
FEATURES
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
23
•
500-MSPS Sample Rate
•
•
•
•
Controlled Baseline
One Assembly/Test Site
One Fabrication Site
Available in Military (–55°C/125°C)
Temperature Range(1)
Extended Product Life Cycle
Extended Product-Change Notification
Product Traceability
•
12-Bit Resolution, 10.5-Bits Effective Number
of Bits (ENOB)
•
•
•
•
•
•
•
•
2-GHz Input Bandwidth
SFDR = 75 dBc at 450 MHz and 500 MSPS
SNR = 64.6 dBFS at 450 MHz and 500 MSPS
2.2-Vpp Differential Input Voltage
LVDS-Compatible Outputs
•
•
•
Total Power Dissipation: 2.2 W
Offset Binary Output Format
APPLICATIONS
•
•
•
•
•
•
Test and Measurement Instrumentation
Software-Defined Radio
Data Acquisition
Power Amplifier Linearization
Communication Instrumentation
Radar
Output Data Transitions on the Rising and
Falling Edges of a Half-Rate Output Clock
•
•
•
On-Chip Analog Buffer, Track and Hold, and
Reference Circuit
80-Pin TQFP PowerPAD™ Package
(14 mm × 14 mm)
Pin Similar to ADS5440/ADS5444
(1) Additional temperature ranges available - contact factory
DESCRIPTION/ORDERING INFORMATION
The ADS5463 is a 12-bit, 500-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and
3.3-V supply, while providing LVDS-compatible digital outputs. The ADS5463 input buffer isolates the internal
switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high
impedance input. An internal reference generator also is provided to simplify the system design.
Designed to optimize conversion of wide-bandwidth signals up to 500-MHz of input frequency at 500 MSPS, the
ADS5463 has outstanding low noise and linearity over a large input frequency range. Input signals above 500
MHz also can be converted due to the large input bandwidth of the device.
The ADS5463 is available in an 80-pin TQFP PowerPAD™ package. The ADS5463 is built on state-of-the-art
Texas Instruments complementary bipolar process (BiCom3X) and is specified over the full extended
temperature range (–55°C to 125°C).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2009, Texas Instruments Incorporated