TPD4S311, TPD4S311A
TPD4S311, TPD4S311A
www.ti.com
SLVSF72C – DECEMBER 2019 – REVISED FEBRUARY 2021
SLVSF72C – DECEMBER 2019 – REVISED FEBRUARY 2021
TPD4S311, TPD4S311A USB Type-C™ Port Protector: Short-to-VBUS Overvoltage
and IEC ESD Protection
These non-ideal equipments and mechanical events
1 Features
make it necessary for the CC and SBU pins to be
20-V tolerant, even though the pins only operate at 5
V or lower. The TPD4S311 enables the CC and SBU
pins to be 20-V tolerant without interfering with normal
operation by providing over-voltage protection on the
CC and SBU pins. The device places high voltage
FETs in series on the SBU and CC lines. When
a voltage above the OVP threshold is detected on
these lines, the high voltage switches are opened up,
isolating the rest of the system from the high voltage
condition present on the connector.
•
4-Channels of Short-to-VBUS overvoltage
protection (CC1, CC2, SBU1, SBU2 ): 24-VDC
tolerant
•
•
4-Channels of IEC 61000-4-2 ESD protection
(CC1, CC2, SBU1, SBU2)
CC1 and CC2 overvoltage protection FETs for
passing VCONN power
– 400-mA VCONN power (TPD4S311)
– 600-mA VCONN power (TPD4S311A)
±35-V surge protection on CC pins (TPD4S311A)
±30-V surge protection on SBU pins (TPD4S311A)
CC dead battery resistors integrated for handling
dead battery use case in mobile devices
1.69-mm × 1.69-mm DSBGA package
•
•
•
Finally, most systems require IEC 61000-4-2 system
level ESD protection for external pins. The TPD4S311
integrates IEC 61000-4-2 ESD protection for the CC1,
CC2, SBU1, and SBU2 pins, eliminating the need
to place high voltage TVS diodes externally on the
connector.
•
2 Applications
•
•
•
•
•
•
Desktop PC/motherboard
Standard notebook PC
Chromebook and WOA
Docking station
Port/cable adapters and dongles
Smartphones
Device Information(1)
PART NUMBER
TPD4S311
PACKAGE
DSBGA (16)
DSBGA (16)
BODY SIZE (NOM)
1.69 mm × 1.69 mm
1.69 mm × 1.69 mm
TPD4S311A
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
3 Description
The TPD4S311 is a single-chip USB Type-C port
protection device that provides 20-V Short-to-VBUS
overvoltage and IEC ESD protection.
Battery
DC/DC
FET
OVP
Since the release of the USB Type-C connector,
many products and accessories for USB Type-C have
been released that do not meet the USB Type-C
specification. One example of this is USB Type-C
Power Delivery adaptors that only place 20 V on the
VBUS line. Another concern for USB Type-C is that
mechanical twisting and sliding of the connector could
short pins due to the close proximity they have in
this small connector. This can cause 20-V VBUS to
be shorted to the CC and SBU pins. Also due to the
proximity of the pins in the Type-C connector, there
is a heightened concern that debris and moisture will
cause the 20-V VBUS pin to be shorted to the CC and
SBU pins.
FET
OVP, OCP
CC Analog
USB PD Phy &
Controller
Power Switch Control
TPD4S311
SBU Mux
CC and SBU Overvoltage Protection
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: TPD4S311 TPD4S311A
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1