TLV320AD12A
3.3-V INTEGRATED ADSL CODEC
SLWS088B – JULY 1999 – REVISED MARCH 2000
Complete Discrete Multitone (DMT)-Based
Asymmetric Digital Subscriber Line (ADSL)
Coder/Decoder (Codec) Solution
2s-Complement Data Format
Selectable 2.2-MSPS or 4.4-MSPS Parallel
Data Transfer Rate
Complies With ANSI T1.413, Issue 2 and
ITU G.992.1
Serial Configuration Port
Eight General-Purpose (GP) Output
Terminals
Supports up to 8-Mbit/s Downstream and
800-kbit/s Upstream Duplex
Supports Multiple-Channel Configuration
Single 3.3-V Supply
Integrated 14-Bit Converter for
Transmitter/Receiver
Hardware/Software Power Down
–40°C to 85°C Operation
Integrated Transmit/Receive (TX/RX)
Channel Filters
Packaged in 100-Pin Plastic Quad Flatpack
Integrated TX/RX Attenuation/Gain
Integrated Reference
High-Speed Parallel Interface
description
TheTLV320AD12Aisahigh-speedcoder/decoder(codec)forcentraloffice-side(CO)discrete-multitone(DMT)
asymmetric-digitalsubscriber line (ADSL) access that supports ANSI Std T1.413, Issue 2 and ITU G.992.1. The
codec is a low-power device comprised of five major functional blocks: transmitter (TX), receiver (RX), clock,
reference, and host interface.
Thetransmitchannelconsistsofa25.875-kHzto1.104-MHzdigitalband-passfilter, a14-bit, 8.832-MSPSDAC,
a 1.104-MHz analog low-pass filter, and a transmit attenuator. The receiver channel consists of a two
programmable-gain-amplifier stages (PGA), a 138-kHz analog low-pass filter, a 14-bit, 4.416-MSPS ADC, a
138-kHz digital low-pass filter. An onboard reference circuit generates 1.5-V reference voltage for the
converters.
The codec has two interface ports: a parallel port for data transfer, and a serial port for control. The parallel port
is 16 bits wide, and is reserved for moving data between the codec and a DSP, such as the TMS320C6XX.
Configuration is done via the serial port. A special interface scheme enables multichannel system design. The
TLV320AD12A can be powered down via a dedicated terminal or through software control to reduce heat
dissipation. Additionally, there is a general-purpose (GP) port consisting of eight output terminals for control of
external circuitry.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265