TLV320ADC3101-Q1
www.ti.com
SLAS816B –MARCH 2012–REVISED AUGUST 2012
Low-Power Stereo ADC With Embedded miniDSP
for Wireless Handsets and Portable Audio
Check for Samples: TLV320ADC3101-Q1
1
FEATURES
•
•
•
Digital Microphone Input Support
Two GPIOs
2
•
•
Qualified for Automotive Applications
Power Supplies:
AEC-Q100 Test Guidance With the Following
Results:
–
–
Analog: 2.6 V–3.6 V
–
Device Temperature Grade 2: –40°C to
+105°C Ambient Operating Temperature
Range
Digital: Core: 1.65 V–1.95 V,
I/O: 1.1 V–3.6 V
•
4-mm × 4-mm 24-Pin RGE (QFN)
–
–
Device HBM ESD Classification Level H1C
Device CDM ESD Classification Level C3B
APPLICATIONS
•
Stereo Audio ADC
•
•
•
•
Wireless Handsets
–
–
92-dBA Signal-to-Noise Ratio
Portable Low-Power Audio Systems
Noise-Cancellation Systems
Supports ADC Sample Rates From 8 kHz to
96 kHz
Front-End Voice or Audio Processor for Digital
Audio
•
•
Instruction-Programmable Embedded miniDSP
Flexible Digital Filtering With RAM
Programmable Coefficient, Instructions, and
Built-In Processing Blocks
DESCRIPTION
The TLV320ADC3101-Q1 is a low-power, stereo
audio analog-to-digital converter (ADC) supporting
sampling rates from 8 kHz to 96 kHz with an
integrated programmable-gain amplifier providing up
to 40-dB analog gain or AGC. A programmable
miniDSP is provided for custom audio processing.
Front-end input coarse attenuation of 0 dB, –6 dB, or
off, is also provided. The inputs are programmable in
a combination of single-ended or fully differential
configurations. Extensive register-based power
control is available via an I2C interface, enabling
mono or stereo recording. Low power consumption
makes the TLV320ADC3101-Q1 ideal for battery-
powered portable equipment.
–
–
–
Low-Latency IIR Filters for Voice
Linear Phase FIR Filters for Audio
Additional Programmable IIR Filters for EQ,
Noise Cancellation or Reduction
–
Up to 128 Programmable ADC Digital Filter
Coefficients
•
•
Six Audio Inputs With Configurable Automatic
Gain Control (AGC)
–
Programmable in Single-Ended or Fully
Differential Configurations
–
Can Be 3-Stated for Easy Interoperability
With Other Audio ICs
The AGC programs to a wide range of attack
(7 ms–1.4 s) and decay (50 ms–22.4 s) times. A
programmable noise-gate function is included to
avoid noise pumping. Low-latency IIR filters optimized
for voice and telephony are available, as well as
linear-phase FIR filters optimized for audio.
Programmable IIR filters are also available and may
be used for sound equalization, or to remove noise
components. The audio serial bus can be
programmed to support I2S, left-justified, right-
justified, DSP, PCM, and TDM modes. The audio bus
may be operated in either master or slave mode.
Low Power Consumption and Extensive
Modular Power Control:
–
–
–
–
6-mW Mono Record, 8-kHz
11-mW Stereo Record, 8-kHz
10-mW Mono Record, 48-kHz
17-mW Stereo Record, 48-kHz
•
•
•
•
Dual Programmable Microphone Bias
Programmable PLL for Clock Generation
I2C™ Control Bus
Audio Serial Data Bus Supports I2S, Left/Right-
Justified, DSP, PCM, and TDM Modes
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
I2C is a trademark of Phillips Electronics.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated