TLV320ADC3120
SBASA91A – DECEMBER 2020 – REVISED JUNE 2021
TLV320ADC3120 2-Channel, 768-kHz, Burr-BrownTM Audio ADC
1 Features
3 Description
•
Multichannel high-performance ADC:
– 2-channel analog microphones or line-in
– 4-channel digital PDM microphones
– Up to 2 analog and up to 2 digital microphone
channels
ADC line and microphone differential input
performance:
– Dynamic range (DR): 106 dB
– THD+N: –95 dB
ADC channel summing mode, DR performance:
– 109-dB, 2-channel summing
ADC input voltage:
– Differential, 2-VRMS full-scale inputs
– Single-ended, 1-VRMS full-scale inputs
ADC sample rate (fS) = 8 kHz to 768 kHz
Programmable channel settings:
– Channel gain: 0 dB to 42 dB, 0.5-dB steps
– Digital volume control: –100 dB to 27 dB
– Gain calibration with 0.1-dB resolution
– Phase calibration with 163-ns resolution
Programmable microphone bias or supply voltage
generation
Low-latency signal processing filter selection
Programmable HPF and biquad digital filters
Automatic gain controller (AGC)
The TLV320ADC3120 is
a
Burr-Brown™ high-
performance, audio analog-to-digital converter (ADC)
that supports simultaneous sampling of up to two
analog channels or four digital channels for the
pulse density modulation (PDM) microphone input.
The device supports line and microphone inputs, and
allows for both single-ended and differential input
configurations. The device integrates programmable
channel gain, digital volume control, a programmable
microphone bias voltage, a phase-locked loop (PLL),
a programmable high-pass filter (HPF), biquad filters,
low-latency filter modes, and allows for sample
rates up to 768 kHz, and allows for sample rates
up to 192 kHz. The device supports time-division
multiplexing (TDM), I2S, or left-justified (LJ) audio
formats, and can be controlled with the I2C interface.
These integrated high-performance features, along
with the ability to be powered from a single-supply
of 3.3 V or 1.8 V, make the device an excellent
choice for space-constrained audio systems in far-
field microphone recording applications.
•
•
•
•
•
•
The TLV320ADC3120 is specified from –40°C to
+125°C, and is offered in a 20-pin WQFN package.
•
•
•
•
•
•
•
•
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
Voice activity detection (VAD)
3.00 mm × 3.00 mm with
0.5-mm pitch
I2C control interface
TLV320ADC3120
WQFN (20)
Integrated high-performance audio PLL
Automatic clock divider setting configurations
Audio serial data interface:
(1) For all available packages, see the package option
addendum at the end of the data sheet.
– Format: TDM, I2S, or left-justified (LJ)
– Word length: 16 bits, 20 bits, 24 bits, or 32 bits
– Master or slave interface
Digital PDM Microphones
Interface 4-channel
PLL and Clock
Generation
IN1P
IN1M
GPIO1
•
•
•
Single-supply operation: 3.3 V or 1.8 V
I/O-supply operation: 3.3 V or 1.8 V
Power consumption for 1.8-V AVDD supply:
FSYNC
BCLK
Stereo ADC
with Front-End
PGA
Programmable
Digital Filters,
Biquads, AGC
Audio Serial
Interface
IN2P_GPI1
(TDM, I2S, LJ)
SDOUT
– 9.5 mW/channel at 48-kHz sample rate
IN2M_GPO1
2 Applications
SDA
SCL
MICBIAS_GPI2
VREF
•
•
•
•
Smart speakers
IP network cameras
Professional microphones and wireless systems
Video conference systems
MICBIAS, Regulators and
Voltage Reference
I2C Control Interface
Thermal Pad
(VSS)
AVDD
DREG
IOVDD
AREG
Simplified Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.