TLK100
www.ti.com
SLLS931B–AUGUST 2009–REVISED DECEMBER 2009
Industrial Temp, Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
Check for Samples: TLK100
1 Introduction
1.1 Features
1
• Temperature From –40°C to 85°C
• Low Power Consumption, < 200mW Typical
• Cable Diagnostics
• Error-Free Operation up to 200 Meters Under
Typical Conditions
• Bus I/O Protection - ±16kV JEDEC HBM
• IEEE 802.3u PCS, 100BASE-TX Transceivers
• Enables IEEE1588 Time-Stamping
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD
Physical Sublayer with Adaptive Equalization
and Baseline Wander Compensation
• Programmable LED Support Link, 10/100 Mb/s
Mode, Activity, and Collision Detect
• 10/100 Mb/s Packet BIST (Built in Self Test)
• 48-pin TQFP Package (7mm) × (7mm)
• 3.3V MAC Interface
• Auto-MDIX for 10/100 Mb/s
• Energy Detection Mode
• 25 MHz Clock Out
• MII Serial Management Interface (MDC and
MDIO)
• IEEE 802.3u MII
1.2 Applications
• IEEE 802.3u Auto-Negotiation and Parallel
Detection
• IEEE 802.3u ENDEC, 10BASE-T
Transceivers and Filters
•
•
Industrial Controls and Factory Automation
General Embedded Applications
1.3 General Description
The TLK100 is a single-port Ethernet PHY for 10BaseT and 100Base TX signaling. It integrates all the
physical-layer functions needed to transmit and receive data on standard twisted-pair cables. This device
supports the standard Media Independent Interface (MII) for direct connection to a Media Access
Controller (MAC).
The TLK100 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or
with combinations of 3.3V, 1.8V, and 1.1V power supplies for reduced power operation.
The TLK100 uses mixed-signal processing to perform equalization, data recovery, and error correction to
achieve robust operation over CAT 5 twisted-pair wiring. It not only meets the requirements of IEEE 802.3,
but maintains high margins in terms of cross-talk and alien noise.
1.4 System Diagram
10BASE-T
or
100BASE-TX
MII
TLK100
MPU/CPU
10/100 Mb/s
25-MHz
Clock
Source
Status
LEDs
B0312-01
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated