Industrial Ethernet Switch EN50155 Unmanaged Ethernet Switch
v1.0 / jul, 2014
TGPS-1080-M12-BP2 Series
TGPS-1080-M12-BP2 Series
EN50155 8-port unmanaged Gigabit PoE Ethernet switch with
8x10/100/1000Base-T(X) P.S.E., M12 connector and 2xbypass included
Features
Leading EN50155-compliant Ethernet switch for rolling stock application
Provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
Supports IEEE 802.3at compliant PoE and with maximum 30Watts per port
Support dual power inputs for power redundancy
Built-in 2 sets of bypass ports
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
1
Support auto-negotiation and auto-MDI/MDI-X
Support store and forward transmission
Support flow control
M12 connectors to guarantee reliable operation against environmental disturbances
Rigid IP-40 housing design
Wall mounting enabled
Introduction
ORing's TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.
The TGPS-1080-M12-BP2 is an un-managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. (4 of these ports also double as 2 sets of bypass ports),
which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGPS-1080-M12-BP2 also supports Power over Ethernet, a system
to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-1080-M12-BP2 switch has
8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGPS-
1080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental
disturbances, such as vibration and shock. TGPS-1080-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance
by ensuring network integrity during power loss. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore,
the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
Practical Operation
TGPS-1080-M12-BP2 can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different
power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over
immediately to guarantee a non-stop operation.
1-622
www.oring-networking.com