Industrial Ethernet Switch EN50155 Managed Ethernet Switch
v1.0a / Sep, 2014
TGPS-9164GT-M12 Series
TGPS-9164GT-M12 Series
EN50155 20-port managed Gigabit PoE Ethernet switch with
16x10/100/1000Base-T(X) P.S.E. and 4x10/100/1000Base-T(X),
M12 connector
Features
Leading EN50155-compliant Ethernet switch for rolling stock application
Support O-Ring (recovery time < 30ms over 250 units of connection) and
MSTP(RSTP/STP compatible) for Ethernet Redundancy
▪
▪
1
Open-Ring support the other vendor's ring technology in open architecture
O-Chain allow multiple redundant network rings
Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function
Supports IEEE 802.3at compliant PoE and total power budget is 240Watts (-24V
model) / 480Watts with maximum 30Watts per port
▪
▪
▪
▪
Support PoE scheduled configuration and PoE auto-ping check function
Support IEEE 1588v2 clock synchronization
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Support IPV6 new internet protocol version
Support Modbus TCP protocol
Support IEEE 802.3az Energy-Efficient Ethernet technology
Provided HTTPS/SSH protocol to enhance network security
Support SMTP client
Support IP-based bandwidth management
Support application-based QoS management
Support Device Binding security function
Support DOS/DDOS auto prevention
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
Support ACL, TACACS+ and 802.1x User Authentication for security
Supports 9.6K Bytes Jumbo Frame
Multiple notification for warning of unexpected event
Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
Support LLDP Protocol
Provided 2xRelay bypass function with four gigabit ports (-BP2 model)
Wall mounting enabled
Introduction
ORing's TransporterTM series managed PoE Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.
TGPS-9164GT-M12 is managed Redundant Ring Ethernet switch with 16x10/100Base-T(X) P.S.E. and 4x10/100/1000Base-T(X) ports which is specifically designed
for the toughest and fully compliant with EN50155 requirement. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units
of connection), Open-Ring, O-Chain, MRP*NOTE and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions
or temporary malfunctions with its fast recovery technology. TGPS-9164GT-M12 also support Power over Ethernet, a system to transmit electrical power up to 30
watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-9164GT-M12 switch has 16x10/100/1000Base-T(X)
P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.
*NOTE: This function is available by request only
1-604
www.oring-networking.com