Industrial Ethernet Switch EN50155 Unmanaged Ethernet Switch
v1.0a / Sep, 2014
TGPS-9084GT-M12 Series
TGPS-9084GT-M12 Series
EN50155 12-port managed Gigabit PoE Ethernet switch with
8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X),
M12 connector
Features
Leading EN50155-compliant Ethernet switch for rolling
stock
▪
▪
application
Support O-Ring (recovery time < 30ms over 250 units of connection) and
MSTP(RSTP/STP compatible) for Ethernet Redundancy
Open-Ring support the other vendor's ring technology in open
▪
architecture
O-Chain allow multiple redundant network rings
▪
▪
Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol)
function
Supports IEEE 802.3at compliant PoE and total power budget is 120Watts
(-24V model) / 240Watts with maximum 30Watts per port
▪
Support PoE scheduled configuration and PoE auto-ping check function
Support IEEE 1588v2 clock synchronization
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Support IPV6 new internet protocol version
Support Modbus TCP protocol
Support IEEE 802.3az Energy-Efficient Ethernet technology
Provided HTTPS/SSH protocol to enhance network security
Support SMTP client
Support IP-based bandwidth management
Support application-based QoS management
Support Device Binding security function
Support DOS/DDOS auto prevention
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
Support ACL, TACACS+ and 802.1x User Authentication for security
Supports 9.6K Bytes Jumbo Frame
Multiple notification for warning of unexpected event
Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision)
configuration
Support LLDP Protocol
▪
▪
▪
Built-in 2 sets of bypass ports (-BP2 model)
Wall mounting enabled
Introduction
ORing's TransporterTM series managed Ethernet switches are designed for industrial applications such as rolling stock, vehicle, and railway. The TGPS-
9084GT-M12, which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports
and 4x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch support Ethernet
Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP*NOTE and MSTP (RSTP/STP compatible) can
protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for
the toughest industrial environments. TGPS-9084GT-M12 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee
*NOTE: This function is available by request only
1-611
D e s i g n e d f o r R u g g e d E xce l l e n ce