5秒后页面跳转
捷配首页

Datasheet > TF38-45S-0.5SV(830)
TF38-45S-0.5SV(830) PDF预览

TF38-45S-0.5SV(830)

更新时间： 2024-10-31 18:08:59
品牌 Logo 应用领域
广濑 - HRS 插座连接器
页数 文件大小 规格书
1页 262K
描述
连接器类型:插座;安装间距:0.5 mm;连接器长度(间距方向):25.7 mm;连接器高度:5.2 mm;连接器宽度(纵向):4.96 mm;接触点位置:垂直类型;ZIF/Non-O ZIF/L

阅读下载

中文翻译

获取价格

TF38-45S-0.5SV(830) 数据手册

  
COUNT  
COUNT  
CHKD  
DESCRIPTION OF REVISIONS  
RE-5-2033  
CHKD DATE  
DESCRIPTION OF REVISIONS  
DATE  
BY  
BY  
18.10.04  
8
1
Y.K.G C.D.H  
△
△
1
2
RE-5-2988  
23.04.24  
C.Y.H C.D.H  
APPLICABLE STANDARD  
OPERATING TEMPERATURE  
RANGE  
STORAGE TEMPERATURE  
RANGE  
-10℃~+50℃(Packed Condition)  
-40℃ ~ +105℃ (note1)  
50V [AC(rms) / DC]  
1
OPERATING OR STORAGE  
HUMIDITY RANGE  
Relative Humidity  
90% MAX(NOT DEWED)  
RATING  
VOLTAGE  
CURRENT  
APPLICABLE  
CABLE  
1
FPC/FFC (t=0.3±0.03mm)  
0.5A [AC(rms) / DC] (note 2)  
SPECIFICATIONS  
ITEM  
TEST METHOD  
REQUIREMENTS  
QT AT  
CONSTRUCTION  
GENERAL EXAMINATION  
MARKING  
VISUALLY AND BY MEASURING INSTRUMENT  
CONFIRMED VISUALLY  
ACCORDING TO DRAWING  
O
O
ELECTRICAL CHARACTERISTICS  
CONTACT RESISTANCE  
INSULATION RESISTANCE  
VOLTAGE PROOF  
MATE APPLICABLE FPC/FFC AND APPLY A CURRENT OF  
AC 20mV MAX (1KHz), 1mA.  
50mΩ MAX.  
O
O
O
O
O
O
INCLUDING FPC/FFC BULK RESISTANCE(L=8mm)  
MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF DC 500MΩ MIN.  
100V.  
MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF  
AC 150V FOR 1 min.  
NO BREAKDOWN  
2
MECHANICAL CHARACTERISTICS  
MECHANICAL OPERATION  
20 TIMES INSERTIONS AND EXTRATIONS.  
① CONTACT RESISTANCE : 50mΩ MAX.  
O
O
O
-
-
-
② NO DAMAGE,CRACK AND LOOSENESS OF PARTS  
VIBRATION  
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE  
① NO ELECTRICAL DISCONTINUITY OF 1㎲.  
② CONTACT RESISTANCE : 50mΩ MAX.  
③ NO DAMAGE,CRACK AND LOOSENESS OF PARTS  
0.75 mm, - m/s2 FOR 10 CYCLES IN 3 DIRECTIONS.  
981m/s2 DIRECTION OF PULSE 6ms AT 3 TIMES  
IN 3 DIRECTIONS.  
SHOCK  
FPC/FFC RETENSION FORCE  
MEASURE BY APPLICABLE FPC/FFC.  
(THICKNESS OF FPC/FFC SHALL BE t=0.30mm  
AT INITIAL CONDITION.)  
HORIZONTAL DIRECTION : 0.3N X n MIN.  
1
O
-
(n : NUMBER OF CONTACTS). (note 3)  
ENVIRONMENTAL CHARACTERISTICS  
TEMPERATURE : -40 → 15 TO 35 → +105 → 15 TO 35 ℃  
① CONTACT RESISTANCE : 50mΩ MAX.  
② INSULATION RESISTANCE : 50MΩ MIN.  
③ NO DAMAGE, CRACK OR LOOSENESS OF PARTS  
RAPID CHANGE OF TEMPERATURE 1  
TIME : 30 → 2~3 → 30 → 2~3 min  
UNDER 5 CYCLES.  
O
O
O
-
-
-
DAMP HEAT (STEADY STATE)  
DAMP HEAT, CYCLE  
EXPOSED AT 40±2℃, 90~95 %, 96h.  
TEMPERATURE : -10 TO +65℃  
HUMIDITY : 90 TO 95%  
10 CYCLE, TOTAL 240h.  
DRY HEAT  
EXPOSED AT 105±2℃, 96h.  
① CONTACT RESISTANCE : 50mΩ MAX.  
② NO DAMAGE, CRACK OR LOOSENESS OF PARTS  
O
O
O
-
-
-
1
COLD  
EXPOSED AT -40±3℃, 96h.  
CORROSION SALT MIST  
SURPHUR DIOXIDE  
[JIS C 0090]  
EXPOSED AT 35±2℃, 5% SALT WATER SPRAY FOR 96h.  
EXPOSED AT 40±2℃, RELATIVE HUMIDITY  
80±5%, 25±5 PPM FOR 96h.  
① CONTACT RESISTANCE : 50mΩ MAX.  
② NO EVIDENCE OF CORROSION WHICH AFFECTS  
TO OPERATION OF CONNECTOR  
O
-
HYDROGEN SULPHIDE  
[JIS C 0092]  
EXPOSED AT 40±2℃, RELATIVE HUMIDITY  
80±5%, 10 TO 15 PPM FOR 96h.  
O
-
RESISTANCE TO SOLDERING HEAT  
1) REFLOW SOLDERING :  
PEAK TMP. 250℃ MAX.  
① NO DEFORMATION OF CASE OF EXCESSIVE  
LOOSENESS OF THE TERMINALS  
REFLOW TMP.230℃ MIN. FOR 60 sec.  
2) SOLDERING IRONS :  
TMP. 350±5℃ FOR 5±1 sec.  
② NO DAMAGE OF ELECTRICAL PERFORMANCE  
O
O
-
-
SOLDERABILITY  
SOLDER DIPPING TEMPERATURE 245±5℃,  
FOR IMMERSION DURATION, 3±0.3 sec.  
A NEW UNIFORM COATING OF SOLDER  
SHALL COVER A MINIMUM OF 95% OF  
THE SURFACR BEING IMMERSED.  
1
(note 1)  
FOLLOW THE SPECIFICATIONS OF FPC/FFC IF IT’S ALLOWABLE MAXIMUM OPERATING TEMPERATURE  
IS BELOW 105℃  
1
1
(note 2)  
WHEN THE SAME VALUE OF CURRENT ARE APPLIED TO ALL CONTACTS AT THE SAME TIME IN ONCE,  
SET THE CURRENT TO THE 70% OF THE RATED CURRENT VALUE.  
(note 3)  
THERE’S A CASE WHICH FPC/FFC RETENTION FORCE DOESN’T FULFILL THE VALUE,  
BECAUSE FPC/FFC SPECIFICATION AFFECTS THE RESULT OF FPC/FFC RETENTION FORCE.  
RELEASED  
DRAWN  
DESIGNED  
CHECKED  
APPROVED  
REMARKS  
B.J KIM  
B.J KIM  
D.H CHO H.C SONG  
18.03.02 18.03.02  
18.03.02  
18.03.02  
UNLESS OTHERWISE SPECIFIED, REFER TO JIS C 5402.  
NOTE QT: QUALIFICATION TEST AT: ASSURANCE TEST O: APPLICABLE TEST  
PART NO.  
HIROSE KOREA CO.,LTD.  
SPECIFICATION SHEET  
TF38-**S-0.5SV(830)  
CL 6537-****-*-830  
CODE NO.(OLD)  
DRAWING NO.  
CODE NO.  
1
ELC4-632306  
CL  
1
F-1-021(Rev.0)  
1

中文翻译

下载PDF

与TF38-45S-0.5SV(830)相关器件

型号 品牌 获取价格 描述 数据表
TF38-50S-0.5SV(830) HRS

获取价格

 		连接器类型:插座;安装间距:0.5 mm;连接器长度(间距方向):28.2 mm;连接器高
TF38-60S-0.5SV(830) HRS

获取价格

 		连接器类型:插座;安装间距:0.5 mm;连接器长度(间距方向):33.2 mm;连接器高
TF-39039015% VISHAY

获取价格

 		General Purpose Inductor, 390uH, 15%, 1 Element
TF-393915% VISHAY

获取价格

 		General Purpose Inductor, 39uH, 15%, 1 Element
TF3-D0AC9 SEIKO

获取价格

 		Crystal Filter, 1 Function(s), 130.05MHz, Monolithic
TF3-D0ACX SEIKO

获取价格

 		Crystal Filter, 1 Function(s), 120MHz, 14kHz BW(delta f), Monolithic
TF3-J3DC5 SEIKO

获取价格

 		1 FUNCTIONS, 243.95 MHz, 13 kHz BW(delta f), CRYSTAL FILTER, ROHS COMPLIANT, MINIATURE PAC
TF3-Q3GC1 SEIKO

获取价格

 		1 FUNCTIONS, 45 MHz, 130 kHz BW(delta f), CRYSTAL FILTER, ROHS COMPLIANT, MINIATURE PACKAG
TF4000AJ TI

获取价格

 		IC,LOGIC GATE,DUAL 3-INPUT NOR,CMOS,DIP,14PIN,CERAMIC
TF400-10 RHOMBUS-IND

获取价格

 		TF Series Fast tr High Performance 20 Section 10-Tap 28-Pin Delay Lines

与TF38-45S-0.5SV(830)相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证