5秒后页面跳转
SST26VF016BT-104V/MF PDF预览

SST26VF016BT-104V/MF

更新时间: 2024-11-24 00:54:39
品牌 Logo 应用领域
美国微芯 - MICROCHIP 时钟光电二极管内存集成电路
页数 文件大小 规格书
77页 2875K
描述
2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory

SST26VF016BT-104V/MF 技术参数

是否Rohs认证: 符合生命周期:Active
包装说明:HVSON, SOLCC8,.25Reach Compliance Code:compliant
Factory Lead Time:5 weeks风险等级:1.85
启动块:BOTTOM/TOP最大时钟频率 (fCLK):104 MHz
数据保留时间-最小值:100耐久性:100000 Write/Erase Cycles
JESD-30 代码:R-PDSO-N8JESD-609代码:e3
长度:6 mm内存密度:16777216 bit
内存集成电路类型:FLASH内存宽度:1
功能数量:1端子数量:8
字数:16777216 words字数代码:16000000
工作模式:SYNCHRONOUS最高工作温度:105 °C
最低工作温度:-40 °C组织:16MX1
封装主体材料:PLASTIC/EPOXY封装代码:HVSON
封装等效代码:SOLCC8,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE并行/串行:SERIAL
编程电压:2.7 V反向引出线:NO
座面最大高度:0.8 mm串行总线类型:SPI
最大待机电流:0.000025 A最大压摆率:0.025 mA
最大供电电压 (Vsup):3.6 V最小供电电压 (Vsup):2.7 V
标称供电电压 (Vsup):3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn) - annealed端子形式:NO LEAD
端子节距:1.27 mm端子位置:DUAL
类型:NOR TYPE宽度:5 mm
写保护:HARDWARE/SOFTWAREBase Number Matches:1

SST26VF016BT-104V/MF 数据手册

 浏览型号SST26VF016BT-104V/MF的Datasheet PDF文件第2页浏览型号SST26VF016BT-104V/MF的Datasheet PDF文件第3页浏览型号SST26VF016BT-104V/MF的Datasheet PDF文件第4页浏览型号SST26VF016BT-104V/MF的Datasheet PDF文件第5页浏览型号SST26VF016BT-104V/MF的Datasheet PDF文件第6页浏览型号SST26VF016BT-104V/MF的Datasheet PDF文件第7页 
SST26VF016B  
2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory  
• Security ID  
Features  
- One-Time Programmable (OTP) 2 KByte,  
Secure ID  
• Single Voltage Read and Write Operations  
- 2.7-3.6V or 2.3-3.6V  
- 64 bit unique, factory pre-programmed  
identifier  
• Serial Interface Architecture  
- Nibble-wide multiplexed I/O’s with SPI-like serial  
command structure  
- User-programmable area  
Temperature Range  
- Mode 0 and Mode 3  
- Industrial: -40°C to +85°C  
- Extended: -40°C to +105°C  
- x1/x2/x4 Serial Peripheral Interface (SPI) Protocol  
• High Speed Clock Frequency  
• Packages Available  
- 2.7-2.6V: 104 MHz max  
- 2.3-3.6V: 80 MHz max  
- 8-contact WDFN (6mm x 5mm)  
- 8-lead SOIJ (5.28 mm)  
- 8-lead SOIC (3.90 mm)  
• Burst Modes  
- Continuous linear burst  
- 8/16/32/64 Byte linear burst with wrap-around  
• All devices are RoHS compliant  
• Superior Reliability  
Product Description  
- Endurance: 100,000 Cycles (min)  
The Serial Quad I/O™ (SQI™) family of flash-memory  
devices features a six-wire, 4-bit I/O interface that  
allows for low-power, high-performance operation in a  
low pin-count package. SST26VF016B also supports  
full command-set compatibility to traditional Serial  
Peripheral Interface (SPI) protocol. System designs  
using SQI flash devices occupy less board space and  
ultimately lower system costs.  
- Greater than 100 years Data Retention  
• Low Power Consumption:  
- Active Read current: 15 mA (typical @ 104 MHz)  
- Standby Current: 15 µA (typical)  
• Fast Erase Time  
- Sector/Block Erase: 18 ms (typ), 25 ms (max)  
- Chip Erase: 35 ms (typ), 50 ms (max)  
All members of the 26 Series, SQI family are manufac-  
tured with proprietary, high-performance CMOS Super-  
Flash® technology. The split-gate cell design and thick-  
oxide tunneling injector attain better reliability and man-  
ufacturability compared with alternate approaches.  
• Page-Program  
- 256 Bytes per page in x1 or x4 mode  
• End-of-Write Detection  
- Software polling the BUSY bit in status register  
• Flexible Erase Capability  
SST26VF016B significantly improves performance and  
reliability, while lowering power consumption. These  
devices write (Program or Erase) with a single power  
supply of 2.3-3.6V. The total energy consumed is a  
function of the applied voltage, current, and time of  
application. Since for any given voltage range, the  
SuperFlash technology uses less current to program  
and has a shorter erase time, the total energy con-  
sumed during any Erase or Program operation is less  
than alternative flash memory technologies.  
- Uniform 4 KByte sectors  
- Four 8 KByte top and bottom parameter overlay  
blocks  
- One 32 KByte top and bottom overlay blocks  
- Uniform 64 KByte overlay blocks  
• Write-Suspend  
- Suspend Program or Erase operation to access  
another block/sector  
• Software Reset (RST) mode  
• Software Write Protection  
SST26VF016B is offered in 8-contact WDFN (6 mm x  
5 mm), 8-lead SOIJ (5.28 mm), and 8-lead SOIC  
(3.90 mm). See Figures 2-1 through 2-3 for pin assign-  
ments.  
- Individual-Block Write Protection with permanent  
lock-down capability  
- 64 KByte blocks, two 32 KByte blocks, and  
eight 8 KByte parameter blocks  
- Read Protection on top and bottom 8 KByte  
parameter blocks  
2014-2015 Microchip Technology Inc.  
DS20005262C-page 1  

与SST26VF016BT-104V/MF相关器件

型号 品牌 获取价格 描述 数据表
SST26VF016BT-104V/SM MICROCHIP

获取价格

2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF016BT-104V/SN MICROCHIP

获取价格

2.5V/3.0V 16 Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF020A MICROCHIP

获取价格

The SST26VF020A Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial
SST26VF032 SST

获取价格

Serial Quad I/O SQI Flash Memory
SST26VF032-80-5I-QAE-T MICROCHIP

获取价格

IC,SERIAL EEPROM,NOR FLASH,4MX8,CMOS,LLCC,8PIN,PLASTIC
SST26VF032-80-5I-QE SST

获取价格

Serial Quad I/O (SQI) Flash Memory
SST26VF032-80-5I-S2AE MICROCHIP

获取价格

32M X 1 FLASH 2.7V PROM, PDSO8, 0.200 INCH, ROHS COMPLIANT, SOIC-8
SST26VF032-80-5I-S2E SST

获取价格

Serial Quad I/O (SQI) Flash Memory
SST26VF032B MICROCHIP

获取价格

2.5V/3.0V 32 Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF032B-104I/MF MICROCHIP

获取价格

2.5V/3.0V 32 Mbit Serial Quad I/O (SQI) Flash Memory