Type SPCX Solid Polymer Aluminum SMT Capacitors
The solid polymer SPCX aluminum capacitor is
an ideal choice for general purpose applications
in audio-visual equipment, home appliances,
computers, oꢀce equipment, optical and measuring
equipment and industrial robots. The SPCX is a very
cost eꢁective capacitor in a compact low-proꢂle
package that is oꢁered on tape and reel. The SPCX is
environmentally green and RoHS compliant.
Highlights
•ꢀ A low-proꢂle height of 1.9 mm
•ꢀ Oꢁered on tape and reel
•ꢀ Can withstand 260 ºC reꢃow for 10 s
•ꢀ 15 mΩ ESR @ 100 kHz
•ꢀ A great value in a small package
Complies with the EU Directive 2002/95/EC
requirement restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd), Hexavalent
chromium (Cr(VI)), PolyBrominated Biphe-
nyls (PBB) andPolyBrominated Diphenyl
Ethers (PBDE).
Specifca-
Operating Temperature Range:
Capacitance Range:
–40 ºC to +105 ºC
100 µF to 470 µF
Operating Working Range:
Capacitance Tolerance:
Surge Voltage:
2.0, 2.5, 4.0, 6.3 Vdc
±20 % (120 Hz @ 20 ºC)
Vdc
2.0
2.5
3.1
4.0
6.3
Surge 2.5
5.0
8.0
Rated Ripple Current:
See ratings table
Surge Test:
Liꢀe Test:
Test temperature is +15 ºC to +35 ºC in series with
a 1000 Ω resistor with the surge voltage applied
for 1000 cycles of 30±5 s (ON) and 5 min 30 s
(OFF)
Apply rated voltage at +105 ºC ±2 ºC for 1000 h
* Leakage current: ≤ ratings table values
* Capacitance: ±10% of initial measured value
* DF: ≤ ratings table values
• Leakage current: I≤0.1CV
* Appearance: No abnormal change to occur
• Capacitance: ±10% of initial measured value
• DF: ≤ the values in the ratings table
• Appearance: No abnormal change to occur
Moisture Resis-
+60 ºC ±2 ºC @ 90% RH; rated voltage for 500 h
* Leakage current: ≤ rating table values
* Capacitance: +70%, –20% (2V, 2.5V)
+60%, –20% (4V)
+50%, –20% (6.3V)
of initial measured value
* DF: ≤200% of initial specified value
* Appearance: No abnormal change to occur
Vibration
10 Hz to 2000 Hz to 10 Hz frequency applied one
cycle per 20 min at a total amplitude of 1.5 mm.
Direction and duration of vibration will be 2 h each
in the X,Y and Z planes for total of 6 h with the
capacitor soldered in place.
• Appearance; No abnormal change to occur.
• Capacitance: Measured value to be stabilized
during test, when measured several times
within 30 min before completion of test.
Shelꢀ Liꢀe Test:
+105 ºC ±2 ºC for 500 h
Leakage current: ≤ rating table values
Capacitance: ±10% of initial measured value
DF: ≤ ratings table values
Appearance: No abnormal change to occur
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com