SN74AVC16244
16-BIT BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES141N–JULY 1998–REVISED MARCH 2005
FEATURES
•
•
•
•
Overvoltage-Tolerant Inputs/Outputs Allow
Mixed-Voltage-Mode Data Communications
•
Member of the Texas Instruments Widebus™
Family
Ioff Supports Partial-Power-Down Mode
Operation
•
DOC™ (Dynamic Output Control) Circuit
Dynamically Changes Output Impedance,
Resulting in Noise Reduction Without Speed
Degradation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
•
•
Less Than 2-ns Maximum Propagation Delay
at 2.5-V and 3.3-V VCC
Dynamic Drive Capability Is Equivalent to
Standard Outputs With IOH and IOL of ±24 mA
at 2.5-V VCC
DESCRIPTION/ORDERING INFORMATION
A Dynamic Output Control (DOC) circuit is implemented, which, during the transition, initially lowers the output
impedance to effectively drive the load and, subsequently, raises the impedance to reduce noise. Figure 1 shows
typical VOL vs IOL and VOH vs IOH curves to illustrate the output impedance and drive capability of the circuit. At
the beginning of the signal transition, the DOC circuit provides a maximum dynamic drive that is equivalent to a
high-drive standard-output device. For more information, refer to the TI application reports, AVC Logic Family
Technology and Applications, literature number SCEA006, and Dynamic Output Control (DOC™) Circuitry
Technology and Applications, literature number SCEA009.
3.2
T
A
= 25°C
T
A
= 25°C
Process = Nominal
Process = Nominal
2.8
2.4
2.0
2.8
2.4
2.0
V
CC
= 3.3 V
1.6
1.2
0.8
0.4
1.6
1.2
0.8
0.4
V
CC
= 2.5 V
V
CC
= 1.8 V
V
CC
= 3.3 V
V
CC
= 2.5 V
V
CC
= 1.8 V
0
17
34
51
68
85 102 119 136 153 170
-160 -144 -128 -112 -96 -80 -64 -48 -32 -16
- Output Current - mA
0
I
- Output Current - mA
I
OH
OL
Figure 1. Output Voltage vs Output Current
ORDERING INFORMATION
TA
PACKAGE(1)
Tape and reel
ORDERABLE PART NUMBER
TOP-SIDE MARKING
AVC16244
TSSOP – DGG
SN74AVC16244DGGR
SN74AVC16244DGVR
SN74AVC16244GQLR
SN74AVC16244ZQLR
TVSOP – DGV
Tape and reel
CVA244
–40°C to 85°C
VFBGA – GQL
Tape and reel
CVA244
VFBGA – ZQL (Pb-free)
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus, DOC are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 1998–2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.