SMBJ SERIES
Surface Mount Transient Voltage Suppressor
YENYO
Stand-off Voltage 5.0 to 440 V
Power Dissipation 600 Watts
Features
RoHS compliant and halogen-free
Reliable low cost construction utilizing
molded plastic technique
SMB/DO-214AA
Both bi-directional and uni-directional
devices are available
.130(3.30)
.155(3.94)
.077(1.95)
.086(2.20)
Typical IR less than 1uA above 10V
Fast response time: typically less than 1.0
ps form 0 Volts to VBR min
.160(4.06)
.180(4.57)
.006(.152)
.012(.305)
.084(2.13)
.096(2.44)
Mechanical Data
Case: SMB/DO-214AA, Molded plastic
has UL flammability classification 94V-0
Polarity:by cathode band denotes uni-
directional device none cathode band
denotes bi-directional device
Max .008(.203)
.030(0.76)
.060(1.52)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
Weight: 0.093 gram
MAXIMUM RATINGS AND THERMAL CHARACTERISTICS
o
TA= 25
C
unless otherwise noted
PARAMTER
SYMBOL
VALUE
UNIT
Watts
Peak Pulse Power Dissipation at TA=25oC
by 10/1000us waveform fig.1 (Note 1,2)
PPPM
Minimum 600
Peak Forward Surge Current, 8.3ms single
Half sine-wave super imposed on rated load
(Note 3)
IFSM
100
A
Steady State Power Dissipation at TA=50oC
PM(AV)
VF
5.0
Watts
V
Maximum lnstantaneous forward voltage
3.5 / 5.0
at 50A for unidirectional devices only (Note 4)
oC/W
oC/W
oC
Typical Thermal Resistance Junction
to Ambient
100
20
R JA
R JL
Typical Thermal Resistance Junction
to Lead
Operating Junction and Storage Temperature
Range
-65 to +150
TJ, TSTG
NOTES : (1) Non-repetitive current pulse, per fig. 3 and derated above TA=25 oC per fig. 2.
(2) Mounted on 0.2”x0.2”(5.0mmx5.0mm) copper pads to each terminal
(3) 8.3ms single half-sine wave duty cycle= 4pulses maximum per minute(unidirectional units only)
(4) VF<3.5V for VBR 200V and VF<5.0V for VBR 201V
1 / 4
R3, JAN-13