SGM61103
3V to 17V, 300mA Buck Converter with
Adjustable Enable Threshold and Hysteresis
GENERAL DESCRIPTION
FEATURES
The SGM61103 is an easy-to-use synchronous Buck
DC/DC converter optimized for low-power applications.
A high switching frequency of 1MHz (TYP) allows the
use of small inductors and provides fast transient
response as well as high output voltage accuracy by
using AHP-COT control topology.
● AHP-COT Control Topology
● Input Voltage Range: 3V to 17V
● Output Voltage Range: 1.2V to 10V
● Quiescent Current: 28µA (TYP)
● Shutdown Current: 450nA (TYP)
● Switching Frequency: Up to 1MHz
● EN Pin with Precise Threshold
● EN_HYS Pin for Additional Hysteresis
Programming
With its wide operating input voltage range of 3V to 17V
and low quiescent current, SGM61103 is ideally suited
for battery-powered systems. The SGM61103 works in
power-save mode to ensure the highest efficiency at
light load conditions.
● 100% Duty Cycle Mode
● Power Good Indicator
● Output Discharge
The SGM61103 supports up to 300mA continuous
output current at wide output voltages between 1.2V
and 10V. Lower-power EN comparator with precise
threshold and hysteresis can be used as the input
supply voltage supervisor (SVS). More hysteresis is
possible by combining with EN_HYS pin. PG pin is also
provided as output voltage indicator.
● Available in a Green TDFN-2×2-8AL Package
APPLICATIONS
Embedded Processing
Battery-Powered Systems
9V to 15V Standby Power Supply
Energy Harvesting
The SGM61103 is available in a Green TDFN-2×2-8AL
Inverter (Negative VOUT
)
package.
Efficiency vs. Input Voltage
TYPICAL APPLICATION
100
90
80
70
60
50
40
30
20
10
0
L 15μH
VIN = 4V to 17V
VOUT = 3.3V
VIN
SW
C4
5pF
R1
470kΩ
VOS
REN1
C1
C2
C3
10μF
EN
FB
10μF
0.1μF
REN2
R2
150kΩ
R3
100kΩ
SGM61103
EN_HYS
REN_HYS
GND
PG
IOUT = 0.1mA
OUT = 0.25mA
OUT = 1mA
OUT = 10mA
OUT = 100mA
OUT = 250mA
Thermal PAD
I
I
I
I
Figure 1. Typical Application Circuit
I
VOUT = 3.3V
3
5
7
9
11
13
15
17
Input Voltage (V)
SG Micro Corp
DECEMBER2023–REV. A
www.sg-micro.com