SGM61232
28V, 3A, Buck DC/DC Converter
GENERAL DESCRIPTION
FEATURES
The SGM61232 is a current mode controlled non-
synchronous Buck converter with 4V to 28V input range,
3A rated output current and adjustable output voltages
from 0.8V up to 25V. A low RDSON N-MOSFET is
integrated as high-side switch. Pulse-skip mode (PSM)
feature is activated automatically for power-save mode
at light loads to improve efficiency. Because of its low
shutdown current (1.2μA, TYP), this device can be
used in battery operated applications. The internal
current mode controller with slope compensation allows
ceramic capacitors at the output and simplifies
compensation network design. The UVLO level can be
adjusted (increased) by an external resistor divider.
Protection against over-voltage transient is provided to
limit the startup or other transient overshoots. Secure
operation in overload conditions is ensured by
cycle-by-cycle current limit, frequency fold-back and
thermal shutdown protection.
● 4V to 28V Input Voltage Range
● 0.8V Internal Voltage Reference
● 0.8V to 25V Adjustable Output Voltage Range
● Integrated 77mΩ High-side MOSFET Supports up
to 3A Continuous Output Current
● Fixed 540kHz Switching Frequency
● Typical 1.2μA Shutdown Quiescent Current
● High Light Load Efficiency
● Adjustable Soft-Start to Limit Inrush Current
● Programmable UVLO Threshold
● Over-Voltage Transient Protection
● Cycle-by-Cycle Current Limit
● Frequency Fold-Back Protection
● Thermal Shutdown Protection
● Available in a Green SOIC-8 (Exposed Pad)
Package
APPLICATIONS
The SGM61232 is offered in a Green SOIC-8 (Exposed
Pad) package and can operate in the -40℃ to +125℃
ambient temperature range.
Industrial Power Supplies
Distributed Power Systems
CPE Equipment
Set-Top Boxes
LCD Displays
Battery Chargers
TYPICAL APPLICATION
CBOOT
VIN
VIN
BOOT
CIN
REN1
L
VOUT
SW
EN
REN2
D
COUT
SGM61232
ROUT1
COMP
SS
C1
R3
VSENSE
GND
CSS
C2
ROUT2
Figure 1. Typical Application Circuit
SG Micro Corp
JANUARY 2023 – REV. A. 3
www.sg-micro.com