SGM61233
4.5V to 28V Input, 3A Output,
Synchronous Buck Converter
GENERAL DESCRIPTION
FEATURES
The SGM61233 is
a
current mode controlled
● 4.5V to 28V Input Voltage Range
● 0.8V Internal Voltage Reference
● Typical 320μA Quiescent Current
● Typical 2μA Shutdown Current
● Integrated 118mΩ and 81mΩ MOSFETs Support
up to 3A Continuous Output Current
● SGM61233A: Internal 2ms Soft-Start,
50kHz to 1500kHz Adjustable Frequency
● SGM61233B: Adjustable Soft-Start,
Fixed 340kHz Frequency
synchronous Buck converter with 4.5V to 28V input
range and 3A rated output current. The quiescent
current is 320μA (TYP) and the shutdown supply
current is 2μA (TYP). Two MOSFETs with low RDSON are
integrated to improve the efficiency. Efficiency is
maximized through power-save mode (PSM) at light
load. The SGM61233A has a wide selectable switching
frequency (50kHz to 1500kHz) to allow desired tradeoff
between efficiency and component sizes. The
SGM61233B has adjustable soft-start time for flexible
application. The SGM61233C has a fixed 340kHz
switching frequency and a fixed internal 2ms soft-start
time.
● SGM61233C: Internal 2ms Soft-Start,
Fixed 340kHz Frequency
● High Light-Load Efficiency
● Hiccup Mode Over-Current Protection
● Over-Voltage Protection
● Thermal Shutdown Protection
● Available in Green SOIC-8 (Exposed Pad) and
TDFN-3×3-10L Packages
The UVLO level can be adjusted (increased) by an
external resistor divider. Secure operation in overload
conditions is ensured by cycle-by-cycle current limit,
hiccup protection and thermal shutdown protection.
The low-side MOSFET has sinking current limit to
prevent excessive reverse current.
APPLICATIONS
Industrial Power Supplies
Distributed Power Bus Supplies
LCD Display
The SGM61233 is offered in the Green SOIC-8
(Exposed Pad) and TDFN-3×3-10L packages.
CPE Equipment
Set-Top Displays
Battery Chargers
TYPICAL APPLICATION
VIN
VIN
VIN
BOOT
VIN
EN
BOOT
PH
CBOOT
CBOOT
LO
LO
CIN
CIN
VOUT
CO
VOUT
CO
EN
PH
SGM61233A
RT
SGM61233B
SS
RO1
RO1
COMP VSENSE
COMP VSENSE
CSS
RT
CCOMP1
CCOMP1
RO2
RO2
CCOMP2
AGND
PGND
CCOMP2
AGND
PGND
RCOMP
RCOMP
Figure 1. Typical Application Circuits
SG Micro Corp
www.sg-micro.com
JULY 2023–REV. A