SGM61432
40V/3.5A, Adjustable Switching Frequency
Buck Converter with 38μA IQ
GENERAL DESCRIPTION
FEATURES
The SGM61432 is a current mode controlled non-
synchronous Buck converter with 4V to 40V input range
and 3.5A continuous output current. A low RDSON
N-MOSFET is integrated as high-side switch. Moreover,
the low 38μA quiescent current and low shutdown current
of only 1.3μA (TYP) make it a suitable choice for
battery-powered applications. Also, the internal loop
compensation simplifies compensation network design
and saves user design time and cost. The UVLO level
can be adjusted (increased) by an external resistor
divider. Switching frequency can be selected over a
wide range (200kHz to 2500kHz) to allow desired tradeoff
among efficiency, component sizes and conversion
voltage ratio. Protection against over-voltage transient is
provided to limit the startup or other transient
overshoots. Secure operation in overload conditions is
ensured by cycle-by-cycle current limit, frequency
fold-back and thermal shutdown protection.
● 4V to 40V Input Voltage Range
● 0.8V to 28V Adjustable Output Voltage Range
● Peak Current Mode Control
● Integrated 93mΩ High-side MOSFET Supports up
to 3.5A Continuous Output Current
● Adjustable Switching Frequency from 200kHz to
2500kHz
● Ultra-Low Quiescent Current: 38μA (TYP)
● Low Shutdown Current: 1.3μA (TYP)
● Power-Save Mode for High Light Load Efficiency
● External Soft-Start
● Frequency Synchronization to External Clock
● Programmable UVLO Threshold
● Output Over-Voltage Protection
● Cycle-by-Cycle Current Limit
● Frequency Fold-Back Protection
● Thermal Shutdown Protection
● Available in a Green SOIC-8 (Exposed Pad)
Package
The SGM61432 is available in a Green SOIC-8
(Exposed Pad) package.
APPLICATIONS
Automotive Battery Regulation
Industrial Power Supplies
Telecom and Datacom Systems
Battery Powered System
TYPICAL APPLICATION
VIN
VIN
EN
BOOT
SW
CBOOT
CIN
L
VOUT
SGM61432
COUT
D
ROUT1
SS
GND
FB
RT/CLK
CSS
Exposed Pad
RT
ROUT2
Figure 1. Typical Application Circuit
SG Micro Corp
www.sg-micro.com
MAY 2023 – REV.A.2