5秒后页面跳转
SGM6602 PDF预览

SGM6602

更新时间: 2023-09-03 20:25:02
品牌 Logo 应用领域
圣邦微 - SGMICRO /
页数 文件大小 规格书
12页 779K
描述
20V Output Voltage Boost Converter

SGM6602 数据手册

 浏览型号SGM6602的Datasheet PDF文件第2页浏览型号SGM6602的Datasheet PDF文件第3页浏览型号SGM6602的Datasheet PDF文件第4页浏览型号SGM6602的Datasheet PDF文件第5页浏览型号SGM6602的Datasheet PDF文件第6页浏览型号SGM6602的Datasheet PDF文件第7页 
SGM6602  
20V Output Voltage Boost Converter  
GENERAL DESCRIPTION  
FEATURES  
The SGM6602 is a boost converter integrated with both  
the PWM switch and the isolation switch. This device  
accepts an input voltage range of 1.8V to 5.5V. And the  
output voltage can reach a maximum of 20V. The  
output of this device has the 9V or 12V default output  
voltage when the FB pin is connected to VIN pin. This  
device has a switching current limit of 900mA (TYP). It  
is highly efficient with peak efficiency of 85% at 3.6V  
input and 12V output when in operation. In shutdown  
mode, the input and output are truly disconnected.  
1.8V to 5.5V Input Voltage Range  
Up to 20V Output Voltage  
Up to 85% Efficiency  
900mA (TYP) Switch Current  
Internal 5ms Soft-Start Time  
Less than 1μA Ultra-Low Shutdown Current  
Integrated Isolation Switch  
Power-Save Mode at Light Load  
Input and Output are Disconnected during  
Shutdown  
Output Short-Circuit and Over-Voltage  
Protection  
This device is targeted at the applications with high  
voltage and small solution size requirements. The  
1.1MHz switching frequency allows this device to use  
small external components. The packages of this  
device also allow it to have a tiny solution size. The  
protection features involve the output short-circuit  
protection, output over-voltage protection and thermal  
shutdown.  
Thermal Shutdown  
-40to +85Operating Temperature Range  
Available in Green WLCSP-0.8×1.2-6B and  
TDFN-2×2-6L Packages  
APPLICATIONS  
PMOLED and Sensor Power Supplies  
Wearable Devices  
The SGM6602 is available in Green WLCSP-0.8×1.2-6B  
and TDFN-2×2-6L packages. It operates over an  
ambient temperature range of -40to +85.  
Portable Medical Equipment  
TYPICAL APPLICATION  
L
10μH  
1.8V to 5.5V  
VIN  
EN  
SW  
CIN  
1.0μF  
4.5V to 20V  
SGM6602  
VOUT  
FB  
CFF  
5pF  
COUT  
4.7μF  
R1  
ON  
OFF  
GND  
R2  
Figure 1. Typical Application Circuit  
SG Micro Corp  
www.sg-micro.com  
DECEMBER 2017 - REV. A  

与SGM6602相关器件

型号 品牌 获取价格 描述 数据表
SGM66025 SGMICRO

获取价格

0.8V Start-Up Input Voltage, 1.8A ISW Synchronous Boost Converter with Load Disconnect
SGM6603 SGMICRO

获取价格

Device Quiescent Current: 30μA (TYP)
SGM6603-3.3YN6G/TR SGMICRO

获取价格

Device Quiescent Current: 30μA (TYP)
SGM6603-5.0YN6G/TR SGMICRO

获取价格

Device Quiescent Current: 30μA (TYP)
SGM6603A SGMICRO

获取价格

90% Efficient Synchronous Boost Converter with 1.1A Switch
SGM6603-ADJYN6G/TR SGMICRO

获取价格

Device Quiescent Current: 30μA (TYP)
SGM6604 SGMICRO

获取价格

20V Output Voltage Synchronous Boost Converter
SGM6605 SGMICRO

获取价格

Device Quiescent Current: 30μA (TYP)
SGM66051 SGMICRO

获取价格

Efficient Synchronous Boost Converter with a 2.7A Switch
SGM66052 SGMICRO

获取价格

Efficient Synchronous Boost Converter with a 2.7A Switch