SGM61235
4.5V to 28V Input, 3A Output,
Synchronous Buck Converter
GENERAL DESCRIPTION
FEATURES
The SGM61235 is an adaptive constant on-time control
(ACOT) synchronous Buck converter with a wide input
voltage range of 4.5V to 28V. This device has 3A
output current capability and operates at pseudo-fixed
frequency. It is an easy-to-use device with power
switches and internal compensation circuit, which are
all integrated in a small 6-pin package, and supports
low-equivalent series resistance (ESR) output capacitors.
A typical 5ms soft-start ramp is also included to
minimize the inrush current.
● Wide 4.5V to 28V Input Voltage Range
● 0.594V to 7V Output Voltage Range
● 3A Continuous Output Current
● Integrated 62mΩ/32mΩ Power MOSFETs
● Low Quiescent Current: 45μA (TYP)
● Shutdown Current: 3μA (TYP)
● 5ms Internal Soft-Start Time
● Pseudo-Fixed 700kHz Switching Frequency
● Adaptive Constant On-Time Mode Control
● Pulse-Skip Mode (SGM61235A)
● Continuous Current Mode (SGM61235B)
● Hiccup Current-Protection Mode
● Output Over-Voltage Protection
● Adjustable Input Under-Voltage Lockout
● Thermal Shutdown with Auto Recovery
● Available in a Green TSOT-23-6 Package
Protection features include cycle-by-cycle current limit,
hiccup current-protection mode, output over-voltage
protection and thermal shutdown in case of excessive
power dissipation.
The SGM61235A enters in pulse-skip mode (PSM) to
improve efficiency during light load operation, while the
SGM61235B works in continuous current mode (CCM)
to achieve low output ripple and good regulation.
APPLICATIONS
12V Distributed Power Supply Buses
Industrial and Consumer Applications
White Goods
The SGM61235 is available in a Green TSOT-23-6
package.
Audio Equipment
Set Top Boxes
Digital Television Printers
TYPICAL APPLICATION
VIN
BOOT
SW
VIN
CBOOT
L
CIN
VOUT
SGM61235
COUT
RFB1
CFF
EN
FB
GND
RFB2
Figure 1. Typical Application Circuit
SG Micro Corp
MAY 2023 – REV. A
www.sg-micro.com