SGM61184
4.5V to 18V Input, 8A,
Synchronous Buck Converter
GENERAL DESCRIPTION
FEATURES
The SGM61184 is an efficient 18V, 8A synchronous
Buck DC/DC converter with integrated power MOSFETs
and a wide 4.5V to 18V input range. This current mode
control device is optimized for high density applications
with minimal number of external components. High
switching frequency, up to 1600kHz, can be chosen to
lessen the solution size by smaller inductor and
capacitors.
● 4.5V to 18V Input Voltage Range
● 0.6V to 12V Output Voltage Range
● 3.5µA (TYP) Shutdown Current
● Integrated RDSON Switches: 8.6mΩ and 4.5mΩ
● 200kHz to 1600kHz Fixed Switching Frequency
● 0.6V Internal Voltage Reference
● External Clock Synchronization
● Peak Current Mode Control with Fast Transient
Response
The peak current mode control with fast transient
response makes the loop compensation simple. The
high-side MOSFET current and low-side MOSFET
sourcing current are cycle-by-cycle limited for overload
protection. The hiccup mode limits MOSFET power
dissipation if short-circuit or overload keeps appearing.
● Hiccup Mode Current Limit
● Safe Start-Up with Pre-Biased Outputs
● Adjustable Soft-Start Time
● Power Sequencing Capability
● Adjustable Input Under-Voltage Lockout (UVLO)
● Power Good Output Monitor for Under-Voltage
and Over-Voltage Protections
A power good supervisor circuit monitors the regulator
output. When the output voltage is in regulation, the PG
open-drain output pin will be in high-impedance state.
An internal deglitch time prevents this pin from pulling
low unless a fault has occurred. The EN pin can be
used to adjust the input UVLO and hysteresis by a
resistor divider. The soft-start and tracking pin (SS/TRK)
can control the output voltage start-up ramp, which
makes the device work as a standalone power supply
or work in tracking situations.
● Non-Latch Thermal Shutdown Protection
● Available in a Green TQFN-3.5×3.5-18AL Package
APPLICATIONS
Test and Measurement Devices
Medical Imaging Equipment
Business Exchange and Server
Wireless Infrastructure
Telecommunications Infrastructure
The SGM61184 is available in a Green TQFN-3.5×3.5-
18AL package.
Efficiency vs. Load Current
100
TYPICAL APPLICATION
95
90
85
80
75
70
VIN
2, 11
1
VIN
BOOT
CBOOT
REN1
+EC1
L
CIN
VOUT
6, 7
SW
17
18
16
13
15
EN
GND
COUT
GND
SGM61184
PG
RFB1
SS/TRK
RT/CLK
COMP
REN2
14
FB
CSS
RFB2
65
RRT
RC
CZ
CP
— 12V to 3.3V, 800kHz, L = 1μH, DCR = 5.5mΩ
— 12V to 1.5V, 600kHz, L = 1μH, DCR = 5.5mΩ
— 9V to 1V, 700kHz, L = 680nH, DCR = 3.1mΩ
— 5V to 1V, 700kHz, L = 680nH, DCR = 3.1mΩ
60
AGND
12
PGND
3, 4, 5, 8, 9, 10
55
50
Figure 1. Typical Application Circuit
0
1
2
3
4
5
6
7
8
Load Current (A)
SG Micro Corp
AUGUST 23,2023
www.sg-micro.com