SGM38042B-1/SGM38042B-3/SGM38042B-5
Single Inductor Triple Output
AMOLED Display Power Supply
GENERAL DESCRIPTION
FEATURES
The SGM38042B-1, SGM38042B-3 and SGM38042B-5
generate both positive and negative precision regulated
voltage power sources with a control scheme for single
inductor dual output converter. The positive output is
programmable from 2.4V to 6.4V with 100mV per step,
and the negative output is programmable from -2V to
-3.2V with 50mV per step.
● Single Inductor for Triple Outputs
● High Efficiency in Wide Output Loading Range
● 850kHz PWM Mode Control Switching Frequency
● Pulse-Skip Operation in Light Load Condition
● Programmable Outputs with 1-Wire Interface
VCPO = 2.4V to 6.4V
VCNO = -2V to -3.2V
A linear regulator capable of 50mA output current is
also integrated. These devices are equipped with
1-Wire interface. With input in the range of 2.7V to 5.5V,
these devices are optimized for loading 100mA in
boost-inverter mode and also work in buck-inverter
mode.
● Auxiliary Output Rail: Fixed 3.3V, 2.8V or 1.8V
● 100mA Output Current for VCPO and VCNO
● Configurable Active Discharge
● Internal Soft-Start to Limit Inrush Current
● Over-Temperature Protection (OTP)
● Over-Current Protection (OCP)
The SGM38042B-1/3/5 are available in a Green
WLCSP-1.51×2.10-15B package. They operate over
an ambient temperature range of -40℃ to +85℃.
● Short Circuit Protection (SCP)
APPLICATIONS
AMOLED/LCD Smart-Phones/Media-Players
Wearable Device Display
SELECTABLE MODEL
Model
Default Outputs
SGM38042B-1
SGM38042B-3
SGM38042B-5
VCPO = 4.6V/VCNO = -2.4V/VCVO = 1.8V
VCPO = 4.6V/VCNO = -2.4V/VCVO = 2.8V
VCPO = 4.6V/VCNO = -2.4V/VCVO = 3.3V
TYPICAL APPLICATION
L
4.7μH
SWN
SWP
VIN
CVO
CVO Enable
CVO_EN
IC
2.7V ~ 5.5V
3.3V/2.8V/1.8V
SGM38042B-1/3/5
1W I/F
Discharge Enable
Discharge Enable
1W
PO
CPO
CNO
NO
DISP
DISN
2.4V ~ 6.4V
-2V ~ -3.2V
CN
10μF
CP
10μF
CV
10μF
CIN
10μF
PG
AG
CNR
10μF
CPR
10μF
Figure 1. Typical Application Circuit
SG Micro Corp
FEBRUARY 2021 – REV. A
www.sg-micro.com