SGM3833A/B
Triple-Output
AMOLED Display Power Supply
● Synchronous Inverting Buck-Boost Converter
GENERAL DESCRIPTION
(ELVSS)
The SGM3833A and SGM3833B are designed for
powering AMOLED displays which require VAVDD
VELVDD and VELVSS. The devices integrate two boost
converters, VO1 for VELVDD and VO3 for VAVDD, and an
inverting buck-boost converter VO2 for VELVSS. Output
voltages of all the three converters can be programmed
in digital steps through the digital interface control pin
(CTRL).
SGM3833A:
,
-4.8V to -0.8V Output Voltage with 100mV Steps
SGM3833B:
-5.4V to -1.4V Output Voltage with 100mV Steps
-4.0V Default Output Voltage
1.5% Accuracy at -4.0V (±60mV)
400mA Output Current Capability
● Synchronous Boost Converter (AVDD)
5.8V to 7.9V Output Voltage with 300mV Steps
7.6V Default Output Voltage
The SGM3833A and SGM3833B are both available in a
Green TQFN-3×3-16L package. They operate over an
ambient temperature range of -40℃ to +85℃.
1.2% Accuracy
100mA Output Current Capability
● VIN and VOUT Bi-Directional Isolation
● Short Circuit Protection (SCP)
● Overload Protection
● Thermal Shutdown
● VELVSS Start-Up Delay: 10ms
FEATURES
● 2.9V to 4.5V Input Voltage Range
● Synchronous Boost Converter (ELVDD)
4.6V to 5.0V Output Voltage with 100mV Steps
4.6V Default Output Voltage
● Short Circuit and OLP Detect Time: 1ms
● Available in a Green TQFN-3×3-16L Package
1.2% Accuracy
400mA Output Current Capability
Output Voltage Sensing Pin for Path Loss
Compensation (FBS)
APPLICATIONS
Smartphones & Tablets
Active Matrix OLED Displays
TYPICAL APPLICATION
3
4
VELVDD
4.6V/400mA
4.7μH
VO1
FBS
1
V
IN = 2.9V to 4.5V
SW1
SW2
10μF
4.7μH
10μH
10
13
VELVSS
-4.0V/400mA
11
15
VO2
SGM3833A/B
2×10μF
10μF
SW3
VAVDD
7.6V/100mA
12
16
VO3
PVIN
AVIN
3×10μF
2
5
8
9
PGND1
PGND2
AGND
CT
Enable Discharge
FD
14
Enable VAVDD
EN_VO3
CTRL
7
6
Enable VELVDD/VELVSS
Program Device
Figure 1. Typical Application Circuit
SG Micro Corp
www.sg-micro.com
DECEMBER 2019 – REV. A. 1