SGM3836A
Triple-Output
AMOLED Display Power Supply
● ELVDD & ELVSS Combined Output Current
Capability
GENERAL DESCRIPTION
The SGM3836A is designed for powering AMOLED
displays which require VAVDD, VELVDD and VELVSS. The
device integrates two boost converters, VO1 for VELVDD
and VO3 for VAVDD, and an inverting buck-boost
converter VO2 for VELVSS. Output voltages of all the
three converters can be programmed in digital steps
through the digital interface control pin (CTRL).
Up to 800mA at 4.6V/-2.5V (VIN = 3.1V)
Up to 780mA at 4.6V/-2.7V (VIN = 3.1V)
Up to 750mA at 4.6V/-3.0V (VIN = 3.1V)
Up to 630mA at 4.6V/-4.0V (VIN = 3.1V)
Up to 510mA at 4.6V/-5.4V (VIN = 3.1V)
● Synchronous Boost Converter (AVDD)
5.8V to 7.9V Output Voltage with 300mV Steps
6.1V Default Output Voltage
The SGM3836A is available in a Green TQFN-3×3-16L
package. It operates over an ambient temperature
range of -40℃ to +85℃.
1% Accuracy
100mA Output Current Capability
● VIN and VOUT Bi-Directional Isolation
● Short Circuit Protection (SCP)
● Overload Protection
● Thermal Shutdown
● VELVSS Start-Up Delay: 10ms
FEATURES
● 2.9V to 4.5V Input Voltage Range
● Synchronous Boost Converter (ELVDD)
4.6V to 5.0V Output Voltage with 100mV Steps
4.6V Default Output Voltage
● Short Circuit and OLP Detect Time: 1ms
● Available in a Green TQFN-3×3-16L Package
1% Accuracy
Output Voltage Sensing Pin for Path Loss
Compensation (FBS)
APPLICATIONS
Smartphones & Tablets
● Synchronous Inverting Buck-Boost Converter
(ELVSS)
Active Matrix OLED Displays
-5.4V to -1.4V Output Voltage with 100mV Steps
-2.5V Default Output Voltage
1.2% Accuracy at -2.5V
TYPICAL APPLICATION
3
4
VELVDD
4.6V (default)
4.7μH
VO1
FBS
1
VIN = 2.9V to 4.5V
SW1
2×10μF
4.7μH
10μH
10
13
VELVSS
-2.5V (default)
11
15
SW2
VO2
SGM3836A
SW3
3×10μF
10μF
VAVDD
6.1V (default)
12
16
VO3
PVIN
AVIN
3×10μF
2
5
8
9
PGND1
PGND2
AGND
CT
Enable Discharge
FD
14
Enable VAVDD
EN_VO3
CTRL
7
6
Enable VELVDD/VELVSS
Program Device
Figure 1. Typical Application Circuit
SG Micro Corp
www.sg-micro.com
DECEMBER 2019 – REV. A. 1