345.00 MHz SAW Filter
•
•
•
•
Designed to Provide Front-end Selectivity in 345.00 MHz
Low-Loss, Coupled-Resonator Quartz Design
Simple External Impedance Matching
SF5402
Ultra Miniature Ceramic QCC8C SMD Package
Absolute Maximum Rating (Ta=25°C)
Parameter
Rating
Unit
dBm
V
Source Power
PS
0
DC Voltage VDC Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
VDC
TA
0
-10 ~ +60
-40 ~ +85
°C
Tstg
°C
Electronic Characteristics
Parameter
Sym
Minimum
Typical
345.00
Maximum
NS
Unit
Nominal Frequency (at 25°C)
fC
NS
MHz
(Center frequency between 3dB point)
Insertion Loss
344.60 … 345.60 MHz
344.60 … 345.60 MHz
-
-
2.5
0.5
4.0
1.5
dB
IL
Amplitude Ripple (p-p)
MHz
∆α
Relative Attenuation (relative to IL)
10.00 … 320.00 MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
48
41
32
26
13
35
47
40
-
53
47
39
31
16
39
52
45
-
-
-
-
-
-
-
-
-
320.00 … 325.00 MHz
325.00 … 337.00 MHz
337.00 … 339.00 MHz
αrel
351.00 … 358.00 MHz
358.00 … 370.00 MHz
370.00 … 700.00 MHz
700.00 … 1000.00 MHz
Absolute Value during the First Year
Frequency Aging
|fA|
10
-
ppm/yr
MΩ
DC Insulation Resistance Between any Two Pins
Input / Output Impedance
-
-
1.0
-
-
50
-
Ω
NS = Not Specified
Notes:
1.
2.
The frequency fC is defined as the midpoint between the 3dB
frequencies.
5.
6.
Turnover temperature, T0, is the temperature of maximum (or
turnover) frequency, f0. The nominal frequency at any case
temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2].
Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, fC. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
7.
8.
All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
3.
4.
Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
Frequency aging is the change in fC with time and is specified at
+65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first
year after manufacture, decreasing in subsequent years.
9.
For questions on technology, prices and delivery please contact
our sales offices or e-mail sales@vanlong.com.
Phone: +86 10 6301 4184
Fax: +86 10 6301 9167
Email: sales@vanlong.com
Web: http://www.vanlong.com
SF5402
© April 2004 by Vanlong Technology Co., Ltd.