5秒后页面跳转
SC68C652BIB48,151 PDF预览

SC68C652BIB48,151

更新时间: 2024-09-19 19:57:23
品牌 Logo 应用领域
恩智浦 - NXP 通信时钟数据传输外围集成电路
页数 文件大小 规格书
43页 195K
描述
SC68C652B - 5 V, 3.3 V and 2.5 V dual UART, 68 mode uP interface QFP 48-Pin

SC68C652BIB48,151 技术参数

是否Rohs认证: 符合生命周期:Obsolete
零件包装代码:QFP包装说明:LFQFP, QFP48,.35SQ,20
针数:48Reach Compliance Code:unknown
HTS代码:8542.31.00.01风险等级:5.74
其他特性:ALSO OPERATES AT 2.5V OR 5V SUPPLY地址总线宽度:4
边界扫描:NO最大时钟频率:80 MHz
通信协议:ASYNC, BIT最大数据传输速率:0.625 MBps
外部数据总线宽度:8JESD-30 代码:S-PQFP-G48
JESD-609代码:e3长度:7 mm
低功率模式:YES湿度敏感等级:1
串行 I/O 数:2端子数量:48
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:LFQFP
封装等效代码:QFP48,.35SQ,20封装形状:SQUARE
封装形式:FLATPACK, LOW PROFILE, FINE PITCH峰值回流温度(摄氏度):260
电源:2.5/5 V认证状态:Not Qualified
座面最大高度:1.6 mm子类别:Serial IO/Communication Controllers
最大供电电压:3.63 V最小供电电压:2.97 V
标称供电电压:3.3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:30宽度:7 mm
uPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIALBase Number Matches:1

SC68C652BIB48,151 数据手册

 浏览型号SC68C652BIB48,151的Datasheet PDF文件第2页浏览型号SC68C652BIB48,151的Datasheet PDF文件第3页浏览型号SC68C652BIB48,151的Datasheet PDF文件第4页浏览型号SC68C652BIB48,151的Datasheet PDF文件第5页浏览型号SC68C652BIB48,151的Datasheet PDF文件第6页浏览型号SC68C652BIB48,151的Datasheet PDF文件第7页 
SC68C652B  
5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.) with 32-byte  
FIFOs, IrDA encoder/decoder, and 68 mode µP interface  
Rev. 02 — 2 November 2009  
Product data sheet  
1. General description  
The SC68C652B is a 2 channel Universal Asynchronous Receiver and Transmitter  
(UART) used for serial data communications. Its principal function is to convert parallel  
data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s.  
The SC68C652B is pin compatible with the SC68C2550B. The SC68C652B provides  
enhanced UART functions with 32-byte FIFOs, modem control interface, DMA mode data  
transfer, and infrared (IrDA) encoder/decoder. The DMA mode data transfer is controlled  
by the FIFO trigger levels and the TXRDYn and RXRDYn signals. On-board status  
registers provide the user with error indications and operational status. System interrupts  
and modem control features may be tailored by software to meet specific user  
requirements. An internal loopback capability allows on-board diagnostics. Independent  
programmable baud rate generators are provided to select transmit and receive baud  
rates.  
The SC68C652B operates at 5 V, 3.3 V and 2.5 V and the industrial temperature range,  
and is available in the plastic LQFP48 package.  
2. Features  
I 2 channel UART with 68 mode (Motorola) µP interface  
I 5 V, 3.3 V and 2.5 V operation  
I 5 V tolerant on input only pins1  
I Industrial temperature range (40 °C to +85 °C)  
I Software compatible with industry standard 16C450, 16C550, and SC16C650  
I Up to 5 Mbit/s baud rate at 5 V and 3.3 V, and 3 Mbit/s at 2.5 V  
I 32-byte transmit FIFO to reduce the bandwidth requirement of the external CPU  
I 32-byte receive FIFO with error flags to reduce the bandwidth requirement of the  
external CPU  
I Independent transmit and receive UART control  
I Four selectable receive and transmit FIFO interrupt trigger levels  
I Automatic software (Xon/Xoff) and hardware (RTSn/CTSn) flow control  
I Programmable Xon/Xoff characters  
I Software selectable baud rate generator  
I Standard modem interface or infrared IrDA encoder/decoder interface  
I Supports IrDA version 1.0 (up to 115.2 kbit/s)  
I Sleep mode  
1. For data bus pins D7 to D0, see Table 27 “Limiting values”.  
 
 
 

与SC68C652BIB48,151相关器件

型号 品牌 获取价格 描述 数据表
SC68C652BIB48,157 NXP

获取价格

SC68C652B - 5 V, 3.3 V and 2.5 V dual UART, 68 mode uP interface QFP 48-Pin
SC68C752B NXP

获取价格

5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and Motorola mP interf
SC68C752BIB48 NXP

获取价格

5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max
SC68C752BIB48,128 NXP

获取价格

SC68C752B - 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and 68 mod
SC68C752BIB48,157 NXP

获取价格

SC68C752B - 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and 68 mod
SC68C752BIBS NXP

获取价格

5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max
SC68C752BIBS,128 NXP

获取价格

SC68C752B - 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and 68 mod
SC68C752BIBS,157 NXP

获取价格

SC68C752B - 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and 68 mod
SC68C92C1A44 NXP

获取价格

IC 2 CHANNEL(S), 1M bps, SERIAL COMM CONTROLLER, PQCC44, PLASTIC, LCC-44, Serial IO/Commun
SC68C92C1A44-T YAGEO

获取价格

Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44