RO3073A-1
• Ideal for 315.0 MHz Transmitters
• Very Low Series Resistance
• Quartz Stability
• Surface-mount Ceramic Case
• Complies with Directive 2002/95/EC (RoHS)
315.0 MHz
SAW
Pb
The RO3073A-1 is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case.
It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters
operating at 315.0 MHz. This SAW is designed specifically for remote control and wireless security
transmitters.
Resonator
Absolute Maximum Ratings
Rating
Value
+0
Units
dBm
VDC
°C
CW RF Power Dissipation (See: Typical Test Circuit)
DC Voltage Between Terminals (Observe ESD Precautions)
Case Temperature
±30
-40 to +85
260
Soldering Temperature (10 seconds / 5 cycles maximum)
°C
SM5035-4
Electrical Characteristics
Characteristic
Sym
Notes
2,3,4,5
2,5,6
Minimum
Typical
Maximum
315.050
±50
Units
f
Center Frequency, +25 °C
Absolute Frequency
314.950
MHz
kHz
dB
C
∆f
Tolerance from 315.0 MHz
C
Insertion Loss
Quality Factor
IL
1.5
8000
1300
25
2.2
Q
Unloaded Q
U
5,6,7
Q
T
50 Ω Loaded Q
L
Temperature Stability
Turnover Temperature
Turnover Frequency
10
40
°C
O
f
f
6,7,8
O
C
2
Frequency Temperature Coefficient
Absolute Value during the First Year
FTC
0.032
ppm/°C
|f |
Frequency Aging
1
5
≤10
ppm/yr
MΩ
Ω
A
DC Insulation Resistance between Any Two Terminals
1.0
R
RF Equivalent RLC Model
Motional Resistance
Motional Inductance
Motional Capacitance
Shunt Static Capacitance
19.4
78.4
3.3
M
L
5, 7, 9
µH
M
C
fF
M
C
5, 6, 9
2, 7
4.1
pF
O
L
Test Fixture Shunt Inductance
64.2
nH
TEST
Lid Symbolization (in addition to Lot and/or Date Codes)
742 // YWWS
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
2.
Frequency aging is the change in f with time and is specified at +65 °C or
C
subject to change without notice.
7.
8.
Derived mathematically from one or more of the following directly
measured parameters: f , IL, 3 dB bandwidth, f versus T , and C .
less. Aging may exceed the specification for prolonged temperatures
above +65 °C. Typically, aging is greatest the first year after manufacture,
decreasing in subsequent years.
C
C
C
O
Turnover temperature, T , is the temperature of maximum (or turnover)
O
The center frequency, f , is measured at the minimum insertion loss point,
frequency, f . The nominal frequency at any case temperature, T , may be
C
O
C
IL , with the resonator in the 50 Ω test system (VSWR ≤ 1.2:1). The
2
MIN
calculated from: f = f [1 - FTC (T -T ) ]. Typically oscillator T is
O
O
C
O
shunt inductance, L
, is tuned for parallel resonance with C at f .
TEST
O C
approximately equal to the specified resonator T .
This equivalent RLC model approximates resonator performance near the
resonant frequency and is provided for reference only. The capacitance C
is the static (nonmotional) capacitance between the two terminals
measured at low frequency (10 MHz) with a capacitance meter. The
O
Typically, f
or f
is approximately equal to the
TRANSMITTER
OSCILLATOR
9.
resonator f .
C
O
3.
4.
One or more of the following United States patents apply: 4,454,488 and
4,616,197.
Typically, equipment utilizing this device requires emissions testing and
government approval, which is the responsibility of the equipment
manufacturer.
measurement includes parasitic capacitance with "NC” pads unconnected.
Case parasitic capacitance is approximately 0.05 pF. Transducer parallel
capacitance can by calculated as: C ≈ C - 0.05 pF.
P
O
5.
6.
Unless noted otherwise, case temperature T = +25 ± 2 °C.
C
10. Tape and Reel standard per ANSI / EIA 481.
The design, manufacturing process, and specifications of this device are
www.RFM.com E-mail: info@rfm.com
© 2008-2011 by RF Monolithics, Inc.
Page 1 of 2
RO3073A-1 6/29/11