5秒后页面跳转
RO3073A-10 PDF预览

RO3073A-10

更新时间: 2024-01-05 14:52:42
品牌 Logo 应用领域
村田 - MURATA 晶体谐振器
页数 文件大小 规格书
2页 262K
描述
1-Port Saw Resonator,

RO3073A-10 技术参数

生命周期:ObsoleteReach Compliance Code:unknown
Factory Lead Time:20 weeks风险等级:5.84
Is Samacsys:N其他特性:TR, 7/13 INCH
晶体/谐振器类型:1-PORT频率稳定性:0.0115%
频率容差 (MHz):0.075插入损耗:2.2 dB
安装特点:SURFACE MOUNT标称工作频率:315 MHz
最高工作温度:85 °C最低工作温度:-40 °C
并联电容:4.05 pF物理尺寸:L5.13XB3.63XH1.6 (mm)/L0.202XB0.143XH0.063 (inch)
表面贴装:YESBase Number Matches:1

RO3073A-10 数据手册

 浏览型号RO3073A-10的Datasheet PDF文件第2页 
RoHS Compliance  
This component is compliant  
with RoHS directive.  
This component was always  
RoHS compliant from the first  
date of manufacture.  
RO3073A-10  
Ideal for 315.050 MHz Transmitters  
Very Low Series Resistance  
Quartz Stability  
315.050 MHz  
Surface-Mount Ceramic Case  
The RO3073A-10 is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic  
case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters  
operating at 315.050 MHz. This SAW is designed for remote-control and wireless security transmitters.  
SAW Resonator  
Absolute Maximum Ratings  
Rating  
Value  
Units  
CW RF Power Dissipation (See: Typical Test Circuit)  
DC Voltage Between Terminals (Observe ESD Precautions)  
Case Temperature  
+0  
dBm  
VDC  
°C  
±30  
-40 to +85  
260  
Soldering Temperature (10 seconds / 5 cycles maximum)  
°C  
SM5035-4  
Characteristic  
Sym  
Notes  
Minimum  
Typical  
Maximum  
Units  
MHz  
fC  
fC  
IL  
Center Frequency (+25 °C)  
Absolute Frequency  
314.975  
315.125  
2,3,4,5  
Tolerance from 315.050 MHz  
±75  
2.2  
kHz  
dB  
Insertion Loss  
Quality Factor  
2,5,6  
5,6,7  
1.5  
8000  
1300  
25  
QU  
QL  
TO  
fO  
Unloaded Q  
50 Loaded Q  
Temperature Stability  
Turnover Temperature  
Turnover Frequency  
10  
40  
°C  
fC  
6,7,8  
ppm/°C2  
ppm/yr  
Frequency Temperature Coefficient  
Absolute Value during the First Year  
FTC  
|fA|  
0.032  
10  
Frequency Aging  
1
5
DC Insulation Resistance between Any Two Terminals  
1.0  
M  
RM  
LM  
RF Equivalent RLC Model  
Motional Resistance  
Motional Inductance  
Motional Capacitance  
Shunt Static Capacitance  
19.4  
78.4  
3.3  
5, 7, 9  
µH  
fF  
CM  
CO  
5, 6, 9  
2, 7  
4.1  
pF  
nH  
LTEST  
Test Fixture Shunt Inductance  
64.2  
Lid Symbolization (in addition to Lot and/or Date Codes)  
Standard Reel Quantities 7/13 inch Reel Sizes  
782 // YWWS  
500/3000 pieces/reel  
10  
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.  
Notes:  
1.  
2.  
Frequency aging is the change in fC with time and is specified at +65°C or less.  
7.  
Derived mathematically from one or more of the following directly measured  
parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.  
Turnover temperature, TO, is the temperature of maximum (or turnover)  
frequency, fO. The nominal frequency at any case temperature, TC, may be  
calculated from: f = fO [1 - FTC (TO -TC)2]. Typically oscillator TO is  
approximately equal to the specified resonator TO.  
Aging may exceed the specification for prolonged temperatures above +65°C.  
Typically, aging is greatest the first year after manufacture, decreasing in  
subsequent years.  
8.  
The center frequency, fC, is measured at the minimum insertion loss point, ILMIN  
,
with the resonator in the 50 test system (VSWR 1.2:1). The shunt  
inductance, LTEST, is tuned for parallel resonance with CO at fC. Typically,  
9.  
This equivalent RLC model approximates resonator performance near the  
resonant frequency and is provided for reference only. The capacitance CO is  
fOSCILLATOR or fTRANSMITTER is approximately equal to the resonator fC.  
3.  
4.  
One or more of the following United States patents apply: 4,454,488 and  
4,616,197.  
Typically, equipment utilizing this device requires emissions testing and  
government approval, which is the responsibility of the equipment manufacturer.  
Unless noted otherwise, case temperature TC = +25°C±2°C.  
the static (nonmotional) capacitance between the two terminals measured at low  
frequency (10 MHz) with a capacitance meter. The measurement includes  
parasitic capacitance with "NC” pads unconnected. Case parasitic capacitance  
is approximately 0.05 pF. Transducer parallel capacitance can by calculated as:  
CP CO - 0.05 pF.  
5.  
6.  
The design, manufacturing process, and specifications of this device are subject  
to change without notice.  
10. Tape and Reel standard per ANSI / EIA 481.  
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2004  
RO3073A-10 (R) 4/18/19 Page 1 of 2  
www.murata.com  

与RO3073A-10相关器件

型号 品牌 获取价格 描述 数据表
RO3073A-11 MURATA

获取价格

1-PORT SAW RESONATOR, 315 MHz, ROHS COMPLIANT, CERAMIC, CASE SM5035-4
RO3073A-5 MURATA

获取价格

1-PORT SAW RESONATOR, 315.05 MHz, ROHS COMPLIANT, CERAMIC, CASE SM5035-4
RO3073A-6 MURATA

获取价格

1-PORT SAW RESONATOR, 315 MHz, ROHS COMPLIANT, CERAMIC, CASE SM5035-4, 4 PIN
RO3073D MURATA

获取价格

1-PORT SAW RESONATOR, 315 MHz, ROHS COMPLIANT, CERAMIC, CASE SM3838-6
RO3073E MURATA

获取价格

1-Port Saw Resonator, 315MHz Nom, ROHS COMPLIANT, CERAMIC, CASE SM3030-6, 6 PIN
RO3073E-1 MURATA

获取价格

315.00 MHz SAW Resonator
RO3073E-11 MURATA

获取价格

1-Port Saw Resonator, 315MHz Nom, ROHS COMPLIANT, CERAMIC, CASE SM3030-6
RO3073E-14 MURATA

获取价格

1-Port Saw Resonator,
RO3075 MURATA

获取价格

1-PORT SAW RESONATOR, 345 MHz, HERMETIC, CASE TO39-3
RO3075A MURATA

获取价格

345.00 MHz SAW Resonator