RO3073A-11
•
•
•
•
•
Ideal for 315.00 MHz Transmitters
Very Low Series Resistance
Quartz Stability
Surface-mount Ceramic Case
Complies with Directive 2002/95/EC (RoHS)
315.00 MHz
SAW
Pb
The RO3073A-11 is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic
case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters
operating at 315.00 MHz. This SAW is designed for remote control and wireless security transmitters.
Resonator
Absolute Maximum Ratings
Rating
Value
+0
Units
dBm
VDC
°C
CW RF Power Dissipation (See: Typical Test Circuit)
DC Voltage Between Terminals (Observe ESD Precautions)
Case Temperature
±30
-40 to +85
260
Soldering Temperature (10 seconds / 5 cycles maximum)
°C
SM5035-4
Electrical Characteristics
Characteristic
Sym
Notes
2,3,4,5
2,5,6
Minimum
Typical
Maximum
315.075
±75
Units
MHz
kHz
dB
f
Center Frequency, +25 °C
Absolute Frequency
314.925
C
∆f
Tolerance from 315.00 MHz
C
Insertion Loss
Quality Factor
IL
1.5
8000
1300
25
2.2
Q
Unloaded Q
U
5,6,7
Q
T
50 Ω Loaded Q
L
Temperature Stability
Turnover Temperature
Turnover Frequency
10
40
°C
O
f
f
6,7,8
O
C
2
Frequency Temperature Coefficient
Absolute Value during the First Year
FTC
0.032
ppm/°C
|f |
Frequency Aging
1
5
≤10
ppm/yr
MΩ
Ω
A
DC Insulation Resistance between Any Two Terminals
1.0
R
RF Equivalent RLC Model
Motional Resistance
Motional Inductance
Motional Capacitance
Shunt Static Capacitance
19.4
78.4
3.3
M
L
5, 7, 9
µH
M
C
fF
M
C
5, 6, 9
2, 7
4.1
pF
O
L
Test Fixture Shunt Inductance
64.2
nH
TEST
Lid Symbolization (in addition to Lot and/or Date Codes)
Standard Reel Quantity 13 inch Reel Size
907 // YWWS
4000 pieces/reel
10
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
2.
Frequency aging is the change in fC with time and is specified at +65 °C or less.
7.
8.
Derived mathematically from one or more of the following directly measured
parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.
Turnover temperature, TO, is the temperature of maximum (or turnover) fre-
Aging may exceed the specification for prolonged temperatures above +65 °C.
Typically, aging is greatest the first year after manufacture, decreasing in subse-
quent years.
quency, fO. The nominal frequency at any case temperature, TC, may be calcu-
The center frequency, fC, is measured at the minimum insertion loss point, ILMIN
,
lated from: f = fO [1 - FTC (TO -TC)2]. Typically oscillator TO is approximately
equal to the specified resonator TO.
This equivalent RLC model approximates resonator performance near the reso-
nant frequency and is provided for reference only. The capacitance CO is the
static (nonmotional) capacitance between the two terminals measured at low fre-
quency (10 MHz) with a capacitance meter. The measurement includes parasitic
capacitance with "NC” pads unconnected. Case parasitic capacitance is approx-
imately 0.05 pF. Transducer parallel capacitance can by calculated as:
CP ≈ CO - 0.05 pF.
with the resonator in the 50 Ω test system (VSWR ≤ 1.2:1). The shunt induc-
tance, LTEST, is tuned for parallel resonance with CO at fC. Typically, fOSCILLA-
TOR or fTRANSMITTER is approximately equal to the resonator fC.
One or more of the following United States patents apply: 4,454,488 and
4,616,197.
Typically, equipment utilizing this device requires emissions testing and govern-
ment approval, which is the responsibility of the equipment manufacturer.
Unless noted otherwise, case temperature TC = +25 ± 2 °C.
The design, manufacturing process, and specifications of this device are subject
to change without notice.
9.
3.
4.
5.
6.
10. Tape and Reel standard per ANSI / EIA 481.
www.RFM.com E-mail: info@rfm.com
© 2009-2011 by RF Monolithics, Inc.
Page 1 of 2
RO3073A-11 6/28/11