RoHS Compliance
This component is compliant
with RoHS directive.
This component was always
RoHS compliant from the first
date of manufacture.
RO3101D-1
•
•
•
Ideal for European 433.92 MHz Transmitters
Very Low Series Resistance
Quartz Stability
The RO3101D-1 is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic
case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters
operating at 433.92 MHz. This SAW is designed specifically for remote-control and wireless security
transmitters operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17 TR 2100.
433.92 MHz
SAW Resonator
Absolute Maximum Ratings
Rating
Value
Units
Input Power Level
0
dBm
VDC
°C
DC voltage
12
Storage Temperature
-40 to +85
260
Soldering Temperature (10 seconds / 5 cycles max.)
°C
SM3838-6 Case
3.8 X 3.8
Characteristic
Sym
Notes
Minimum
Typical
Maximum
Units
MHz
fC
fC
IL
Center Frequency (+25 °C)
Absolute Frequency
433.870
433.970
2,3,4,5
Tolerance from 433.920 MHz
±50
2.5
kHz
dB
Insertion Loss
Quality Factor
2,5,6
5,6,7
1.3
8900
1250
25
QU
QL
TO
fO
Unloaded Q
50 Loaded Q
Temperature Stability
Turnover Temperature
Turnover Frequency
10
40
°C
fC
6,7,8
ppm/°C2
ppm/yr
Frequency Temperature Coefficient
Absolute Value during the First Year
FTC
|fA|
0.032
10
Frequency Aging
1
5
DC Insulation Resistance between Any Two Terminals
1.0
M
RM
LM
RF Equivalent RLC Model
Motional Resistance
Motional Inductance
Motional Capacitance
Shunt Static Capacitance
16.4
53.1
2.5
5, 7, 9
µH
fF
CM
CO
5, 6, 9
2, 7
2.4
pF
nH
LTEST
Test Fixture Shunt Inductance
56.7
Lid Symbolization (in addition to Lot and/or Date Codes)
Standard Reel Quantity Reel Size 7 Inch
Reel Size 13 Inch
748 // YWWS
500 Pieces/Reel
3000 Pieces/Reel
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
1.
2.
Frequency aging is the change in fC with time and is specified at +65°C or less.
7.
8.
Derived mathematically from one or more of the following directly measured
parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.
Turnover temperature, TO, is the temperature of maximum (or turnover)
frequency, fO. The nominal frequency at any case temperature, TC, may be
calculated from: f = fO [1 - FTC (TO -TC)2]. Typically oscillator TO is
approximately equal to the specified resonator TO.
Aging may exceed the specification for prolonged temperatures above +65°C.
Typically, aging is greatest the first year after manufacture, decreasing in
subsequent years.
The center frequency, fC, is measured at the minimum insertion loss point, ILMIN
,
with the resonator in the 50 test system (VSWR 1.2:1). The shunt
inductance, LTEST, is tuned for parallel resonance with CO at fC. Typically,
9.
This equivalent RLC model approximates resonator performance near the
resonant frequency and is provided for reference only. The capacitance CO is
fOSCILLATOR or fTRANSMITTER is approximately equal to the resonator fC.
3.
4.
One or more of the following United States patents apply: 4,454,488 and
4,616,197.
Typically, equipment utilizing this device requires emissions testing and
government approval, which is the responsibility of the equipment manufacturer.
Unless noted otherwise, case temperature TC = +25°C±2°C.
the static (nonmotional) capacitance between the two terminals measured at low
frequency (10 MHz) with a capacitance meter. The measurement includes
parasitic capacitance with "NC” pads unconnected. Case parasitic capacitance
is approximately 0.05 pF. Transducer parallel capacitance can by calculated as:
CP CO - 0.05 pF.
5.
6.
The design, manufacturing process, and specifications of this device are subject
to change without notice.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2007
RO3101D-1 (R) 4/23/19 Page 1 of 2
www.murata.com