MODEL: R7G4HML3-6-STYVS1
Remote I/O R7G4H Series
[1] OPTIONS
blank: none
/Q: Options other than the above (specify the specification)
MECHATROLINK I/O MODULE
(self-synch input & DC voltage/current output, 1 point each,
isolated, screw terminal block, message transmission
command, MECHATROLINK- III use)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Functions & Features
• 1 point self-synch input and 1 point each DC
voltage/current output for MECHATROLINK- III
• Easy parameter setting with M-System's configurator
software
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7772-STYVS1)
RELATED PRODUCTS
• PC configurator software (model: R7CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
130 (5.12)
55 (2.17)
GENERAL SPECIFICATIONS
Connection
57 (2.24)
mm (inch)
MECHATROLINK-III: MECHATROLINK-III connector
Power input, I/O: M3 separable screw terminal (torque 0.5
N·m)
Solderless terminal: Refer to the drawing at the end of the
section.
MODEL: R7G4HML3-6-STYVS1–R[1]
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
ORDERING INFORMATION
• Code number: R7G4HML3-6-STYVS1-R[1]
Specify a code from below for [1].
(e.g. R7G4HML3-6-STYVS1-R/Q)
• Specify the specification for option code /Q
(e.g. /C01/SET)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Input to output to MECHATROLINK or FE to power
Status indicator LEDs: PWR, ERR, CON, LNK1, LNK2
(Refer to the instruction manual for details)
Parameter setting: With PC configurator software (model:
R7CFG)
TERMINAL BLOCK
• Angle span
6: Screw terminal block for power supply
Connector for MECHATROLINK- III
Screw terminal block for I/O
• Moving average
• Number of point for linearization
• Linearization
• Output range
• scaling
I/O TYPE
• Output function at the loss of communication
Refer to the instruction manual for detail.
STYVS1: Self-synch input, DC voltage/current output, 1 point each
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R7G4HML3-6-STYVS1 SPECIFICATIONS
ES-7772-I Rev.1 Page 1/9
https://www.m-system.co.jp/