MODEL: R7G4HML3-6-SVF4
Remote I/O R7G4H Series
[1] OPTIONS (multiple selections)
Standards & Approvals
blank: CE marking
MECHATROLINK I/O MODULE
(high-speed DC voltage/current input, 4 points, isolated,
screw terminal block, MECHATROLINK- III use)
Functions & Features
/UL: UL approval, CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
• 4 points high-speed DC voltage/current input for
MECHATROLINK- III
• Easy parameter setting of individual channels with M-
System's configurator software
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating (UL not available)
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7772-SVF4)
130 (5.12)
RELATED PRODUCTS
• PC configurator software (model: R7CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
55 (2.17)
57 (2.24)
mm (inch)
GENERAL SPECIFICATIONS
Connection
MODEL: R7G4HML3-6-SVF4–R[1]
MECHATROLINK-III: MECHATROLINK-III connector
Power input, input: M3 separable screw terminal (torque
0.5 N·m)
ORDERING INFORMATION
• Code number: R7G4HML3-6-SVF4-R[1]
Specify a code from below for [1].
(e.g. R7G4HML3-6-SVF4-R/UL/Q)
• Specify the specification for option code /Q
(e.g. /C01/SET)
Solderless terminal: Refer to the drawing at the end of the
section.
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Input 0 to input 1 to input 2 to input 3 to
MECHATROLINK or FE to power
TERMINAL BLOCK
6: Screw terminal block for power supply
Connector for MECHATROLINK- III
Screw terminal block for I/O
Zero adjustments: Configurable via R7CFG
Span adjustments: Configurable via R7CFG
Input range: Configurable via R7CFG
Number of times of averaging: Configurable via R7CFG
Status indicator LEDs: PWR, ERR, CON, LNK1, LNK2
(Refer to the instruction manual for details)
I/O TYPE
SVF4: DC voltage /current input (10 V/20 mA),
high-speed, 4 points
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
R7G4HML3-6-SVF4 SPECIFICATIONS
ES-7772-B Rev.0 Page 1/8
http://www.m-system.co.jp/