Applicable Standard
Operating
Storage
Note.1 -55℃ to +105℃
Note.2 -55℃ to +85℃
Temperature Range
Temperature Range
Voltage
AC 600 V, DC 600 V
―
―
Rating
19.0 A/pin (AWG#14)
AWG#14 TO AWG#22
Current
Applicable Cable
Conduct specified current to
a single pin of contacts.
(UL-STYLE:UL1007,1015)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
Marking
ELECTRICAL CHARACTERISTICS
X
X
X
-
-
-
Note.3
5 m max. (contact spacing)
Contact Resistance
100 mA (DC or 1000 Hz) max.
Note.3 50 m max. (shell spacing)
5000 M min.
Insulation Resistance
Voltage Proof
500 V DC.
X
-
3310 V AC. for 1 min.
No flashover or breakdown.
Temperature Rise
Max.30℃ increase from ambient temperature.
Conduct specified current to a single pin.
Current carried:19.0A/pin (AWG#14)
X
-
MECHANICAL CHARACTERISTICS
Contact Insertion and
Withdrawal Forces
Insertion force : 3.0 N max.
Withdrawal force : 1.0 N min.
Measure with the contact pair.
X
X
-
-
Connector Insertion and
Withdrawal Forces
Insertion force : 150 N max.
Withdrawal force : 50 N min.
Measure with the lock lever released
(all contacts are assembled)
Contact(Lance)
Apply axial pull out force at the speed
rate of 25mm/min to the terminal, and measure
the force when the terminal is pull out.
Retention Forces
68.6 N min.
X
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
MN.KENJO
TU.TANIGUCHI
TY.MIURA
20190408
20190407
20190406
Above spesification shows the values in assembled condition with “PQ50WA(2 unit integrated type)”
series.In case of using for other series of connector,the specification is based on each series.
Unless otherwise specified, refer to IEC 60512.
DRAWN
TY.MIURA
20190406
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-129680-00-00
PQ50WA-25P-UNIT
PART NO.
CODE NO.
SPECIFICATION SHEET
0
△
1/3
HIROSE ELECTRIC CO., LTD.
CL236-2121-0-00
FORM HD0011-2-1