APPLICABLE STANDARD
Operating
Storage temperature
Note.1 -55℃ to +105℃
Note.2 -55℃ to +85℃
temperature range
Voltage
range
Note.4 AC 600 V , DC 600 V
―
―
Note.5
PQ50B contact:
30A/pin (AWG#10 UL1015)
PQ50(A) contact:
19A/pin (AWG#14 UL1015)
PQ50S(A) contact:
12.5A/pin (AWG#18 UL1007)
Note.5
PQ50B contact:
AWG#10 TO AWG#12(UL-STYLE:UL1015)
PQ50(A) contact:
Rating
Current
Applicable cable
AWG#14 TO AWG#22
(UL-STYLE:UL1007,UL1015)
PQ50S(A) contact:
Conduct specified current to
a single pin of contacts.
AWG#18 TO AWG#28
(UL-STYLE:UL1007)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
ELECTRICAL CHARACTERISTICS
X
X
X
-
-
-
Note.3
5 m MAX.
Contact resistance
Insulation resistance
Voltage proof
Note.6
Note.6
Note.6
100 mA (DC OR 1000 Hz) MAX.
500 V DC.
5000 M MIN.
3310 V AC. for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Note.3
1) Change in contact resistance of
contacts : 20 m MAX.
100 times insertions and extractions at
PQ50WT-12S-UNIT and PQ50WT-12P-UNIT.
X
-
Mechanical operation
2) No damage, crack and looseness of parts.
1) No electrical discontinuity of 10 s.
2) No damage, crack and looseness of parts.
1) No electrical discontinuity of 10 s.
2) No damage, crack and looseness of parts.
Note.6
Note.6
Frequency : 10 to 55 Hz, single amplitude
X
X
-
-
Vibration
Shock
0.75 mm, at 2 h, for 3 directions.
490 m/s2 duration of pulse 11ms at 3 times in
3 both axial directions.
ENVIRONMENTAL CHARACTERISTICS
Rapid change of temperature Note.6
Note.3
1) Change in contact resistance of
X
-
Temperature -55 → 15 to 35 → 105 → 15 to 35 C
contacts : 20 m MAX.
Time 30 → 2 to 3 → 30 → 2 to 3 min under 5 cycles. 2) No damage, crack and looseness of parts.
Note.6
Note.6
Note.6
Exposed at 105 C 2 C, 96 h, and combine
the applicable connectors.
Heat resistance
Cold resistance
X
X
X
-
-
-
Note.3
1) Change in contact resistance of
contacts : 20 m MAX.
Exposed at -55 C 3 C, 96 h, and combine
the applicable connectors.
2) Insulation resistance : 1000 M MIN.
3) No damage, crack and looseness of parts.
Exposed at 60 C 2 C, 90 to 95 %, 96 h,
and combine the applicable connectors.
Humidity
REMARK
"A" in parenthesis PQ50(A) and PQ50S(A) indicates sequential contacts , PQ50A and PQ50SA.
Note.1 1) The product performance is guaranteed only in the temperature adequate people’s activities.
2) Include temperature rise caused by current-carrying.
3) Specifications for assembled item with applicable housing
Note.2 Packing materials are not included.
Note.3 Cable conductor resistance is not included.
Note.4 The rated voltage is 250V for explosion proof according to the factory electrical equipment explosion proof guidelines.
Note.5 Refer to the specification sheet of PQ50*-**C*A for pin performance.
Note.6 The combination condition is PQ50WT-12S-UNITx6 units and PQ50WT-12P-UNITx6 units.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
MN.KENJO
TU.TANIGUCHI
HY.MATSUDA
HY.MATSUDA
20200402
20200402
20200402
20200402
Above specification shows the values in assembled condition with applicable crimp contacts.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-128424-00-00
PQ50WT-6U-FLJ
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
1/1
△
CL236-2077-2-00
FORM HD0011-2-1