Applicable Standard
Operating
Storage
Note.1 -55℃ to +105℃
Note.2 -55℃ to +85℃
Temperature Range
Temperature Range
AC 600 V ,DC 600 V(only connector)
Voltage
―
―
AC 300 V ,DC 300 V(TUV・UL)
PQ50(A) contact:
・PQ50WA/S-10*/34*-UNIT
AWG#14 to AWG#22 (only 10pin)
(UL-STYLE:UL1007,UL1015)
・Others
Rating
19.0A/pin (AWG#14)
PQ50S(A) contact:
Current
12.5A/pin (AWG#16 UL1007)
12.5A/pin (AWG#18 UL1007)
Conduct specified current to
a single pin of contacts.
Applicable Cable
AWG#16 to AWG#28
(UL-STYLE:UL1007)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
Marking
ELECTRICAL CHARACTERISTICS
X
X
X
-
-
-
Note.3 5 m max. (contact spacing)
Note.3 50 m max. (shell spacing)
5000 M min.
Contact Resistance
100 mA (DC or 1000 Hz) max.
Insulation Resistance
Voltage Proof
500 V DC.
X
-
3310 V AC. for 1 min.
No flashover or breakdown.
Temperature Rise
Conduct specified current to a single pin of
below contacts.
PQ50(A) contact ⇔ PQ50(A) contact
Max.30℃ increase from ambient temperature.
(AWG#14 UL1015)
(AWG#14 UL1015)
X
-
Current carried:19A/pin
PQ50S(A) contact ⇔ PQ50S(A) contact
(AWG#18 UL1007)
(AWG#18 UL1007)
Current carried:12.5A/pin
MECHANICAL CHARACTERISTICS
Contact Insertion and
Withdrawal Forces
① Insertion force : 3.0 N max.
Withdrawal force : 1.0 N min.
② Insertion force : 3.0 N max.
Withdrawal force : 0.3 N min.
Measure with the below contact pair.
X
X
X
-
-
-
①
②
PQ50(A) contact ⇔ PQ50(A) contact
PQ50S(A) contact ⇔ PQ50S(A) contact
Connector Insertion and
Withdrawal Forces
Measure with the look lever released
(all contacts are assembled)
Insertion force : 270 N max.
Withdrawal force : 34 N min.
use 2 units of PQ50WA/S-10*/34*-UNIT
and PQ50WASX-46*-UNIT.
Contact(Lance)
① 68.6N min.
② 29.4N min.
Apply axial pull out force at the speed
Retention Forces
rate of 25mm/min to the terminal, and measure
the force when the terminal is pull out.
① PQ50(A) -15P(S)CFA(AWG#14)
② PQ50S(A) -1822P(S)CFA(AWG#18)
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
NM.NISHIMATSU
NM.NISHIMATSU
MO.SHIMOYAMA
MO.SHIMOYAMA
17.11.21
17.11.21
17.11.21
17.11.21
Above spesification shows the values in assembled condition with “PQ50WA” series.
In case of using for other series of connector,the specification is based on each series.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-129062-30-00
PQ50WASX-46P-UNIT(30)
SPECIFICATION SHEET
0
△
1/3
HIROSE ELECTRIC CO., LTD.
CL236-2088-0-30
FORM HD0011-2-1