VAPPLICABLE STANDARD
OPERATING
STORAGE
2 -55C TO +85C
1 -55C TO +105C
TEMPERATURE RANGE
TEMPERATURE RANGE
AC 600 V ,DC 600 V(ONLY CONNECTOR)
VOLTAGE
―
―
AC 300 V ,DC 300 V(TUV・UL)
PQ50(A) CONTACT:
・PQ50WA/S-10*/34*-UNIT
RATING
19.0A/PIN (AWG#14)
AWG#14 TO AWG#22 (ONLY 10PIN)
(UL-STYLE:UL1007,UL1015)
PQ50S(A) CONTACT:
CURRENT
12.5A/PIN (AWG#16 UL1007)
12.5A/PIN (AWG#18 UL1007)
CONDUCT SPECIFIED CURRENT TO
A SINGLE PIN OF CONTACTS.
APPLICABLE CABLE
・OTHERS
AWG#16 TO AWG#28
(UL-STYLE:UL1007)
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
X
X
X
X
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
MARKING
ELECTRICAL CHARACTERISTICS
X
X
X
-
-
-
3
3
5 m MAX. (CONTACT SPACING)
50 m MAX. (SHELL SPACING)
CONTACT RESISTANCE
100 mA (DC OR 1000 Hz) MAX.
5000 M MIN.
INSULATION RESISTANCE
VOLTAGE PROOF
500 V DC.
X
-
3310 V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
TEMPERATURE RISE
CONDUCT SPECIFIED CURRENT TO A SINGLE PIN OF
BELOW CONTACTS.
PQ50(A) CONTACT ⇔ PQ50(A) CONTACT
MAX.30℃ INCREASE FROM AMBIENT TEMPERATURE.
(AWG#14 UL1015)
(AWG#14 UL1015)
X
-
CURRENT CARRIED:19A/PIN
PQ50S(A) CONTACT ⇔ PQ50S(A) CONTACT
(AWG#18 UL1007)
(AWG#18 UL1007)
CURRENT CARRIED:12.5A/PIN
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
①INSERTION FORCE : 3.0 N MAX.
WITHDRAWAL FORCE : 1.0 N MIN.
②INSERTION FORCE : 3.0 N MAX.
WITHDRAWAL FORCE : 0.3 N MIN.
MEASURE WITH THE BELOW CONTACT PAIR.
WITHDRAWAL FORCES
X
X
-
-
①
②
PQ50(A) CONTACT ⇔ PQ50(A) CONTACT
PQ50S(A) CONTACT ⇔ PQ50S(A) CONTACT
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURE WITH THE LOOK LEVER RELEASED
(ALL CONTACTS ARE ASSEMBLED)
INSERTION FORCE : 270 N MAX.
WITHDRAWAL FORCE : 34 N MIN.
USE 2 UNITS OF PQ50WA/S-10*/34*-UNIT
AND PQ50WASX-46*-UNIT.
① 68.6N MIN
APPLY AXIAL PULL OUT FORCE AT THE SPEED
1
② 29.4N MIN
RATE OF 25mm/min TO THE TERMINAL, AND MESURE
CONTACT(LANCE)
X
-
THE FORCE WHEN THE TERMINAL IS PULL OUT.
RETENTION FORCES
① PQ50(A) -15P(S)CFA(AWG#14)
1
② PQ50S(A) -1822P(S)CFA(AWG#18)
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
HY.MATSUDA
CHECKED
DATE
1
5
DIS-E-00004837
TU.TANIGUCHI
RI.TAKAYASU
NM.NISHIMATSU
WR.YAMADA
20210325
20160531
20160531
20160531
△
REMARK
APPROVED
CHECKED
DESIGNED
ABOVE SPESIFICATION SHOWS THE VALUES IN ASSEMBLED CONDITION WITH “PQ50WA” SERIES.
IN CASE OF USING FOR OTHER SERIES OF CONNECTOR,THE SPECIFICATION IS BASED ON
EACH SERIES.
1
DRAWN
WR.YAMADA
20160531
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-129288-00-00
PQ50WA-2UA-PC2
PART NO.
CODE NO.
SPECIFICATION SHEET
1
1/3
HIROSE ELECTRIC CO., LTD.
△
CL0236-2098-0-00
FORM HD0011-2-1