NCP1339
High-Voltage, Quasi-
Resonant Controller
featuring Valley Lock-Out
and Power Saving Mode
www.onsemi.com
The NCP1339 is a highly integrated quasi−resonant flyback
controller capable of controlling rugged and high−performance
off−line power supplies as required by adapter applications. With an
integrated active X−cap discharge feature and power savings mode,
the NCP1339 can enable no−load power consumption below 10 mW
for 45 W notebook adapters.
14
1
SOIC−14 NB
(LESS PIN 13)
D SUFFIX
The quasi−resonant current−mode flyback stage features a
proprietary valley−lockout circuitry, ensuring stable valley switching.
CASE 751AN
th
This system works down to the 6 valley and toggles to a frequency
foldback mode to eliminate switching losses. When the loop tends to
force below 25−kHz frequencies, the NCP1339 skips cycles to contain
the power delivery.
MARKING DIAGRAM
14
To help build rugged converters, the controller features several key
protective features: an internal brown−out, a non−dissipative Over
Power Protection for a constant maximum output current regardless of
the input voltage, a latched over−voltage protection through a
dedicated pin.
NCP1339xG
AWLYWW
1
NCP1339 = Specific Device Code
x
A
WL
Y
WW
G
= C, D, E, F, G or H
= Assembly Location
= Wafer Lot
= Year
= Work Week
Features
• High−voltage Current Source for Lossless Start−up Sequence
• X2 Capacitors Discharge Capability
• Power Savings Mode (PSM) for Extremely Low No−Load Power:
= Pb−Free Package
• Wide V Range from 10 V to 28 V
CC
• Latching−off 28−V V Over−Voltage Protection
CC
• Abnormal Overcurrent Fault Protection for Winding Short Circuit or
PIN CONNECTIONS
Inductor Saturation Detection
X2
REM
HV
• Integrated High−Voltage Startup Circuit with Brown−Out Detection
• Fault Input for Severe Fault Conditions, NTC Compatible for OTP
OPP
ZCD
Fault
FB
NC
• Circuit Latching Off In Severe Fault Detection (OVP or OTP)
• Internal Temperature Shutdown
NC
VCC
DRV
GND
• Valley Switching Operation with Valley−Lockout for Noise−Free
Operation
CS
• Frequency Fold−back for Highest Performance in Standby Mode
• 25−kHz Clamp and Skip Mode
• Timer−Based Overload Protection (Latched or Auto−Recovery
ORDERING INFORMATION
See detailed ordering and shipping information in the package
Options)
dimensions section on page 30 of this data sheet.
• Adjustable Overpower Protection
• 4−ms Soft−Start Timer
• ZCD Blanking Time to Ignore Leakage Ringing at Turn−Off:
3 ms for C, D and E versions and 0.7 ms for F, G or H versions
• These Devices are Pb−Free and are RoHS Compliant
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
August, 2015 − Rev. 3
NCP1339/D