MRA
Vishay Mills
www.vishay.com
Wirewound Resistors, Non-Magnetic,
Non-Inductive, Axial Lead
FEATURES
• High temperature coating (> 350 °C)
• Non-magnetic and all welded constructions
greatly enhance frequency response.
Combined with non-inductive Ayrton-Perry
winding the inductive reactance and signal loss
are almost totally eliminated.
• Ideal for Audio Industry
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING (1)
POWER RATING (1)
P25 °C
CHARACTERISTIC U + 250 °C CHARACTERISTIC V + 350 °C
RESISTANCE WEIGHT
GLOBAL HISTORICAL
TOLERANCE (2)
%
P25 °C
W
W
RANGE
(typical)
g
MODEL
MODEL
MRA-05
MRA-10
MRA-12
MRA05
MRA10
MRA12
4.0
7.0
5.0
1, 5, 10
1, 5, 10
1, 5, 10
0.01 to 15.0K
0.05 to 35.0K
0.05 to 85.0K
1.00
3.87
5.02
10.0
12.0
10.0
Notes
(1)
Vishay Mills MRA models have two power ratings depending on the operation temperature and stability requirements.
Other tolerances may be available, contact factory
(2)
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
ppm/°C
lb
MRA RESISTOR CHARACTERISTICS
30 for 10 and above; 50 for 1.0 to 9.9 ; 90 for 0.5 to 0.99
10 minimum
Temperature Coefficient
Terminal Strength
Dielectric Withstanding Voltage
Operating Temperature Range
Maximum Working Voltage
VAC
°C
500 for MRA-05 and 1000 for MRA-10 and MRA-12
Characteristic U = - 65 to + 250, Characteristic V = - 65 to + 350
(P x R)1/2
V
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: MRA-1225R00JE12 (visit www.vishay.net Vishay Dale parts numbering manual for all options)
M
R
A
-
1
2
2
5
R
0
0
J
E
1
2
GLOBAL MODEL
(6 digits)
VALUE
(5 digits)
TOLERANCE
(1 digit)
PACKAGING CODE
(3 digits)
SPECIAL
(up to 2 digits)
(See Standard Electrical
Specifications Global
Model column
R = Decimal
K = Thousand
1R500 = 1.5
1K500 = 1.5 k
F = 1.0 ꢀ
J = 5.0 ꢀ
K = 10.0 ꢀ
E07 = Tape/reel (MRA-10, MRA-12)
E48 = Tape/reel (MRA-05)
E12 = Bulk, up to 100 pc boxes
(Dash Number)
From 1 to 99
as applicable
for options)
Historical Part Number example: MRA12W25R0J
MRA12
W = STANDARD
25
5 %
HISTORICAL MODEL
TC
RESISTANCE VALUE
TOLERANCE
Revision: 02-May-12
Document Number: 31801
1
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000