MPC9230

更新时间： 2024-01-31 16:25:31

品牌	Logo	应用领域
摩托罗拉 - MOTOROLA		时钟
页数	文件大小	规格书
16页	296K
描述
800 MHz Low Voltage PECL Clock Synthesizer

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MPC9230 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	QLCC
包装说明：	PLASTIC, LCC-28	针数：	28
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.25
JESD-30 代码：	S-PQCC-J28	JESD-609代码：	e0
长度：	11.505 mm	湿度敏感等级：	1
端子数量：	28	最高工作温度：	85 °C
最低工作温度：	-40 °C	最大输出时钟频率：	750 MHz
封装主体材料：	PLASTIC/EPOXY	封装代码：	QCCJ
封装等效代码：	LDCC28,.5SQ	封装形状：	SQUARE
封装形式：	CHIP CARRIER	峰值回流温度（摄氏度）：	225
电源：	3.3 V	主时钟/晶体标称频率：	20 MHz
认证状态：	Not Qualified	座面最大高度：	4.57 mm
子类别：	Clock Generators	最大压摆率：	110 mA
最大供电电压：	3.465 V	最小供电电压：	3.135 V
标称供电电压：	3.3 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	Tin/Lead (Sn85Pb15)	端子形式：	J BEND
端子节距：	1.27 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	30	宽度：	11.505 mm
uPs/uCs/外围集成电路类型：	CLOCK GENERATOR, OTHER

MPC9230 数据手册

Freescale Semiconductor, Inc.

MOTOROLA

Order number: MPC9230

Rev 4, 07/2004

SEMICONDUCTOR TECHNICAL DATA

800 MHz Low Voltage PECL

Clock Synthesizer

MPC9230

The MPC9230 is a 3.3V compatible, PLL based clock synthesizer targeted

for high performance clock generation in mid-range to high-performance

telecom, networking and computing applications. With output frequencies from

50 MHz to 800 MHz¹and the support of differential PECL output signals the

device meets the needs of the most demanding clock applications.

800 MHz LOW VOLTAGE

CLOCK SYNTHESIZER

Features

•

50 MHz to 800 MHz¹synthesized clock output signal

Differential PECL output

LVCMOS compatible control inputs

On-chip crystal oscillator for reference frequency generation

Alternative LVCMOS compatible reference clock input

3.3V power supply

FN SUFFIX

28-LEAD PLCC PACKAGE

CASE 776-02

Fully integrated PLL

Minimal frequency overshoot

Serial 3-wire programming interface

Parallel programming interface for power-up

32 lead LQFP and 28 PLCC packaging

32-Lead Pb-free Package Available

SiGe Technology

FA SUFFIX

32-LEAD TQFP PACKAGE

CASE 873A-03

Ambient temperature range -40°C to +85°C

Pin and function compatible to the MC12430

Functional Description

The internal crystal oscillator uses the external quartz crystal as the basis of its frequency reference. The frequency of the internal

crystal oscillator is divided by 16 and then multiplied by the PLL. The VCO within the PLL operates over a range of 800 to 1600 MHz.¹

Its output is scaled by a divider that is configured by either the serial or parallel interfaces. The crystal oscillator frequency f_XTAL, the

PLL feedback-divider M and the PLL post-divider N determine the output frequency.

The feedback path of the PLL is internal. The PLL adjusts the VCO output frequency to be 8⋅M times the reference frequency by

adjusting the VCO control voltage. Note that for some values of M (either too high or too low) the PLL will not achieve phase lock. The

PLL will be stable if the VCO frequency is within the specified VCO frequency range (800 to 1600 MHz¹). The M-value must be pro-

grammed by the serial or parallel interface.

The PLL post-divider N is configured through either the serial or the parallel interfaces, and can provide one of four division ratios

(1, 2, 4, or 8). This divider extends performance of the part while providing a 50% duty cycle. The output driver is driven differentially

from the output divider, and is capable of driving a pair of transmission lines terminated 50Ω to V_CC– 2.0V. The positive supply voltage

for the internal PLL is separated from the power supply for the core logic and output drivers to minimize noise induced jitter.

The configuration logic has two sections: serial and parallel. The parallel interface uses the values at the M[8:0] and N[1:0] inputs

to configure the internal counters. It is recommended on system reset to hold the P_LOAD input LOW until power becomes valid. On

the LOW–to–HIGH transition of P_LOAD, the parallel inputs are captured. The parallel interface has priority over the serial interface.

Internal pullup resistors are provided on the M[8:0] and N[1:0] inputs prevent the LVCMOS compatible control inputs from floating.

The serial interface centers on a fourteen bit shift register. The shift register shifts once per rising edge of the S_CLOCK input. The

serial input S_DATA must meet setup and hold timing as specified in the AC Characteristics section of this document. The configura-

tion latches will capture the value of the shift register on the HIGH-to-LOW edge of the S_LOAD input. See the programming section

for more information. The TEST output reflects various internal node values, and is controlled by the T[2:0] bits in the serial data

stream. In order to minimize the PLL jitter, it is recommended to avoid active signal on the TEST output.

1. The VCO frequency range of 800–1600 MHz is available at an ambient temperature range of 0 to 70°C. At –40 to +85°C, the VCO frequency (output

frequency) is limited to max. 1500 MHz (750 MHz)

For More Information On This Product,

Go to: www.freescale.com

12 3 4 5 6 7...16

中文翻译

下载PDF

与MPC9230相关器件

型号	品牌	获取价格	描述	数据表
MPC9230AC	IDT	获取价格	Clock Generator, 750MHz, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, O.80 MM PITCH, MS-02
MPC9230ACR2	NXP	获取价格	750MHz, OTHER CLOCK GENERATOR, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, MS-026BBA, LQF
MPC9230ACR2	IDT	获取价格	Clock Generator, 750MHz, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, MS-026BBA, LQFP-32
MPC9230EI	IDT	获取价格	Clock Generator, 750MHz, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9230EI	NXP	获取价格	750 MHz, OTHER CLOCK GENERATOR, PQCC28, LEAD FREE, PLASTIC, LCC-28
MPC9230FA	MOTOROLA	获取价格	800MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32
MPC9230FAR2	MOTOROLA	获取价格	800MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32
MPC9230FNR2	MOTOROLA	获取价格	Clock Generator, 800MHz, CMOS, PQCC28, PLASTIC, LCC-28
MPC9239	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer
MPC9239AC	FREESCALE	获取价格	900 MHz Low Voltage LVPECL Clock Synthesizer

与MPC9230相关文章

解读BSS138W数据手册：引脚信息、电气参数及替换型号推荐
2024-06-19

5
深入解读2N7002E数据手册：引脚图说明、应用与替换型号推荐
2024-06-19

4
手册资料解析：OPA2277UA引脚图信息、电气参数
2024-06-19

5
手册解析：INA826AIDR引脚图及功能说明、电气参数介绍
2024-06-19

5

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9230

MPC9230 技术参数

MPC9230 数据手册

与MPC9230相关器件

与MPC9230相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9230

MPC9230 技术参数

MPC9230 数据手册

与MPC9230相关器件

与MPC9230相关文章

您还可以找

您在本页遇到什么问题？