MP5403
Configurable 2.7V-6V Mini PMIC
with Dual 2.5A/3.5A Buck, One Load Switch,
and Input Power Supervisory
DESCRIPTION
FEATURES
The MP5403 is
a
monolithic power
Low Iq: 85µA for Two Switchers Total
Two Buck Converters
o 3.5A with 55mΩ/20mΩ RDS(ON)
o 2.5A with 60mΩ/22mΩ RDS(ON)
o 1.5MHz Switching Frequency
o 180° Interleaving Operation
o 100% Duty Cycle
o Load Switch Mode by Pulling FB Low
o Latch-Off Short-Circuit Protection (SCP)
o Parallel Capability by Connecting SW
Nodes Together
o Internal Soft Start and Output Discharge
o Optimized Light-Load Efficiency
Available Fixed Output Options via Package
Trim:
management unit containing two high-
efficiency, step-down, switching converters and
a load switch. The two regulators supply current
up to 3.5A and 2.5A separately, and the load
switch supplies up to 3A of load current with an
extremely low RDS(ON). With an input range of up
to 6V, the MP5403 is ideal for powering ASIC
and SOC for solid-state drives and other
compact power systems.
The peak-current-mode control scheme with
pulse-skip-mode operation provides the two
switchers with fast transient response, high
light-load efficiency, and minimum capacitance
by using an interleaving PWM clock between
the two switchers. The 3A load switch with a
low 20mΩ on resistance provides flexible
system configuration.
Ch1: 0.9V, 1.1V, 2.5V, 2.85V
Ch2: 0.9V, 1.2V, 1.8V, 2.5V
One Load Switch
o 3A with 20mΩ RDS(ON)
A full set of enable control pins and power good
o Soft Start and Output Discharge
o Over-Current Protection (OCP)
EN and Power Good for Power Sequencing
Input Power Failure Indicator (PFL) with
Adjustable Threshold and Delay
Thermal Shutdown
open-drain
indicators
allow
for
easy
implementation of the start-up and shutdown
sequences.
Full protection features include over-current
protection (OCP) and thermal shutdown.
Available in Ultra-Thin UTQFN-20
(2.5mmx3mm) Package
The MP5403 requires a minimal number of
readily
available,
standard,
external
components and is available in a small UTQFN-
20 (2.5mmx3mm) package.
APPLICATIONS
Solid-State Drives
Hybrid Drives
Low Voltage System Power
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For
MPS green status, please visit the MPS website under Quality
Assurance. “MPS” and “The Future of Analog IC Technology” are registered
trademarks of Monolithic Power Systems, Inc.
MP5403 Rev. 1.0
9/20/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
1