MP5479
2.7V to 5.5V PMIC with Four 2A/2.5A/4.5A/4.5A
Buck Converters, 5 LDOs, and Configurable
System Settings via I2C and MTP
o 50mV Dropout at 300mA Load
System:
DESCRIPTION
The MP5479 is a complete power management
solution that integrates four high-efficiency step-
down DC/DC converters, five low-dropout
regulators, and a flexible logic interface.
o I2C Bus and User-Programmable MTP
o Two-Time Programmable MTP (1)
o Power-On/Off Control
o Multi-Function LDO2/EN1 Pin (EN1
Input Logic Level ≤ 3.3V)
o Power-On Reset Output
o Flexible Power-On/Off Sequence via
MTP (0.5ms/2ms/8ms/16ms Selectable
Time Slot)
Constant-on-time (COT) control in the DC/DC
converter provides fast transient response. The
adjustable switching frequency (up to 2.75MHz)
during CCM greatly reduces the external
inductor and capacitor value. Full protection
features include UVLO, OCP, OVP, and thermal
shutdown.
o Flexible DC/DC, LDO On/Off via the
MTP
o Available in a QFN-26 (3.5mmx4.5mm)
Package
The output voltage is adjustable through the I2C
bus or preset by the MTP (multiple-time
programmable) interface. The power-on/off
sequence is also programmable via the MTP and
can be controlled through I2C bus online.
Optimized Performance with
MPS Inductor MPL-AL6050
Series
Note:
The MP5479 requires a minimal number of
external components, and is available in a
space-saving QFN-26 (3.5mmx4.5mm) package
with wettable flanks.
1) The two-time programmable MTP is only for the standard
version of the MP5479GRM-0000.
APPLICATIONS
Infotainment
Video Recorders
Display Electronics
FEATURES
High-Efficiency Step-Down Converters:
o Buck 1: 4.5A DC/DC Converter
o Buck 2: 2.5A DC/DC Converter
o Buck 3: 4.5A DC/DC Converter
o Buck 4: 2A DC/DC Converter
o Buck 1 and Buck 3 Can Work in Parallel
o Buck 2 and Buck 4 Can Work in Parallel
o 2.7V to 5.5V Operating Input Range
o 0.4V to 3.58V/12.5mV Step or 0.4V to
2.2V/7.4mV Step Optional VOUT Range
for Buck 1, Buck 2, and Buck 3
o 0.4V to 3.58V/12.5mV Step VOUT Range
for Buck 4
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
o Adjustable Switching Frequency
o Adjustable Soft-Start Time
o Adjustable Phase Delay
o Programmable Forced PWM, Auto-
PFM, PWM Mode
o Output OCP, OVP
Low-Dropout Regulators:
o One Dedicated RTC LDO
o Four Low-Noise LDOs
o Two Separate Input Power Supplies
MP5479 Rev. 1.1
8/26/2021
MonolithicPower.com
1
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.