MP5461
Dual Input, 4-Switch Integrated
Buck-Boost Converter
with Input ORing and Selection
DESCRIPTION
FEATURES
Dual Input ORing Switches:
o 4.2V to 5.5V Input Voltage Range for
VIN1
The MP5461 is a dual input, 4-switch, integrated
buck-boost converter. It is capable of regulating
the output voltage from 4.2V to 5.5V VIN1 and
2.5V to 5.5V VIN2. The VIN1 can support up to
22V input voltage but is not functional after
>5.75V.
o Supports 22V Voltage Stress for VIN1
o 5.75V OVP Shutdown for VIN1
o 2.5V to 5.5V Input Voltage Range for
VIN2
o Fast Reverse Block within 2μs
o 1A Current Capability for Each Channel
o Soft-Start Control
The MP5461 has two auto-ORing switches from
VIN1 and VIN2 to achieve a stable input for the
buck-boost converter. The two sets of ORing
MOSFETs are integrated. If one channel power
source falls, the fast turn-off protection
minimizes the reverse current.
o Fast SCP (Short-Circuit Protection) on
OR_OUT
o Power-Path Selection Input
o Power-Path Status Indication
Buck-Boost Converter
The buck-boost converter can operate from an
input voltage above, equal to, or below the
output voltage. It uses current-mode control with
1.8MHz fixed PWM frequency to optimize
stability and transient response. In a light-load
condition, it enters PFM mode to get high light-
load efficiency. Integrated MOSFETs minimize
the solution size while maintaining high
efficiency.
o 1.8MHz Switching Frequency for CCM
o 3.3V Fixed Output Voltage
o 500mA Continuous Output Current
o 1ms Soft-Start Time
o Auto PFM/PWM Mode
o Output Over-Voltage Protection
o Hiccup Over-Current Protection
1µA Shutdown Current
200µA Quiescent Current
Active Low System EN Pin
EN to OR_OUT Start-Up Delay 300μs
Over-Temperature Shutdown
Available in a Wafer Level Chip Scale
Packaging: CSP-12(1.4mmx1.8mm)
Fault protection includes VIN1 OVP shutdown,
output hiccup current limiting, and thermal
shutdown.
The MP5461 is available in a tiny CSP-12
(1.4mmx1.8mm) package.
APPLICATIONS
USB-C Cable
VCONN Powered USB Device
All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For
MPS green status, please visit MPS website under Quality Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
MP5461 Rev. 1.0
2/19/2019
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
1