MBR1090CT thru MBR10100CT
Dual High-Voltage Schottky Barrier Rectifiers
Reverse Voltage 90 to 100 Volts Forward Current 10.0 Amperes
Features
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Dual rectifier construction, positive center tap
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
Guardring for overvoltage protection
For use in low voltage, high frequency inverters, free wheeling,
and polarity protection applications
TO-220AB
Mechanical Data
Case: JEDEC TO-220AB molded plastic body over passivated
chips
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
250oC/10 seconds, 0.25" (6.35mm) from case
Polarity: As marked
Mounting Position: Any
Mounting Torque: 10 in-lbs maximum
Weight: 0.08 ounce, 2.24 grams
Maximum Ratings and Electrical Characteristics
Dimensions in inches and (millimeters)
( TC = 25oC unless otherwise noted )
Parameter
Symbol
MBR1090CT
MBR10100CT
100
Unit
Maximum repetitive peak reverse voltage
Working peak reverse voltage
VRRM
VRWM
VDC
90
90
90
Volts
Volts
Volts
100
100
Maximum DC blocking voltage
Maximum average forward
rectified current (See Fig. 1)
Total device
Per leg
10
5.0
IF(AV)
IFSM
Amps
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) per leg
120
Peak repetitive reverse current per leg at tp = 2.0us, 1KHz
IRRM
0.5
Amps
Voltage rate of change (rated VR)
dv/dt
10,000
V/us
Maximum instantaneous forward voltage per leg (Note 4)
at IF=5.0A, TC=25oC
VF
0.85
0.75
Volts
at IF=5.0A, TC=125oC
Maximum reverse current per TJ=25oC
leg at working peak reverse
voltage (Note 4)
100
6.0
uA
mA
oC/W
oC
IR
TJ=100oC
Typical thermal resistance per leg
Operating junction temperature range
Storage temperature range
RθJC
TJ
4.4
-55 to +150
-55 to +150
TSTG
oC
Notes:
1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset
2. Clip mounting (on case), where leads do overlap heatsink
3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19")
4. Pulse test: 300us pulse width, 1% duty cycle
356