LM2695
www.ti.com
SNVS413A –JANUARY 2006–REVISED APRIL 2013
LM2695 High Voltage (30V, 1.25A) Step Down Switching Regulator
Check for Samples: LM2695
1
FEATURES
DESCRIPTION
The LM2695 Step Down Switching Regulator features
all of the functions needed to implement a low cost,
efficient, buck bias regulator capable of supplying
1.25A to the load. This buck regulator contains a 33V
N-Channel Buck Switch, and is available in the
thermally enhanced WSON-10 and HTSSOP-14
packages. The hysteretic regulation scheme requires
no loop compensation, results in fast load transient
response, and simplifies circuit implementation. The
operating frequency remains constant with line and
load variations due to the inverse relationship
between the input voltage and the on-time. The
current limit detection is set at 1.25A. Additional
features include: VCC under-voltage lockout, thermal
shutdown, gate drive under-voltage lockout, and
maximum duty cycle limiter.
2
•
•
•
•
•
•
Integrated 33V, N-Channel Buck Switch
Integrated Start-Up Regulator
Input Voltage Range: 8V to 30V
No Loop Compensation Required
Ultra-Fast Transient Response
Operating Frequency Remains Constant with
Load Current and Input Voltage
•
•
•
•
•
•
•
Maximum Duty Cycle Limited During Start-Up
Adjustable Output Voltage
Valley Current Limit At 1.25A
Precision Internal Reference
Low Bias Current
Highly Efficient Operation
Thermal Shutdown
PACKAGE
•
•
•
10-Pin WSON (4 mm x 4 mm)
14-Pin HTSSOP
TYPICAL APPLICATIONS
•
•
High Efficiency Point-Of-Load (POL) Regulator
Exposed Thermal Pad For Improved Heat
Dissipation
Non-Isolated Telecommunication Buck
Regulator
•
Secondary High Voltage Post Regulator
Basic Step Down Regulator
8V - 30V
Input
VIN
VCC
BST
SW
C3
C1
R
ON
LM2695
C4
L1
RON/SD
V
OUT
SHUTDOWN
D1
R1
R2
R3
SS
ISEN
FB
C2
C6
RTN
SGND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated