LM2694
www.ti.com
SNVS444A –MAY 2006–REVISED APRIL 2013
LM2694 30V, 600 mA Step Down Switching Regulator
Check for Samples: LM2694
1
FEATURES
DESCRIPTION
The LM2694 Step Down Switching Regulator features
all of the functions needed to implement a low cost,
efficient, buck bias regulator capable of supplying
0.6A to the load. This buck regulator contains an N-
Channel Buck Switch, and is available in the 3 x 3
2
•
•
•
•
•
•
Integrated N-Channel Buck Switch
Integrated Start-Up Regulator
Input Voltage Range: 8V to 30V
No Loop Compensation Required
Ultra-Fast Transient Response
thermally enhanced WSON-10 package and
a
TSSOP-14 package. The feedback regulation
scheme requires no loop compensation, results in
fast load transient response, and simplifies circuit
implementation. The operating frequency remains
constant with line and load variations due to the
inverse relationship between the input voltage and
the on-time. The valley current limit results in a
smooth transition from constant voltage to constant
current mode when current limit is detected, reducing
the frequency and output voltage, without the use of
foldback. Additional features include: VCC under-
voltage lockout, thermal shutdown, gate drive under-
voltage lockout, and maximum duty cycle limiter.
Operating Frequency Remains Constant with
Load Current and Input Voltage Variations
•
•
•
•
•
•
•
•
Maximum Duty Cycle Limited During Start-Up
Adjustable Output Voltage
Valley Current Limit At 0.6A
Maximum Switching Frequency: 1 MHz
Precision Internal Reference
Low Bias Current
Highly Efficient Operation
Thermal Shutdown
Package
TYPICAL APPLICATIONS
•
•
WSON-10 (3 mm x 3 mm) w/Exposed Pad
TSSOP-14
•
•
High Efficiency Point-Of-Load (POL) Regulator
Non-Isolated Telecommunication Buck
Regulator
•
Secondary High Voltage Post Regulator
Basic Step Down Regulator
8V - 30V
Input
VIN
VCC
BST
SW
C3
C1
R
ON
LM2694
C4
L1
RON/SD
V
OUT
SHUTDOWN
D1
R1
R2
R3
SS
ISEN
FB
C2
C6
RTN
SGND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated