5秒后页面跳转
L8567 PDF预览

L8567

更新时间: 2024-10-18 22:31:39
品牌 Logo 应用领域
杰尔 - AGERE /
页数 文件大小 规格书
42页 670K
描述
SLIC for Peoples Republic of China Applications

L8567 数据手册

 浏览型号L8567的Datasheet PDF文件第2页浏览型号L8567的Datasheet PDF文件第3页浏览型号L8567的Datasheet PDF文件第4页浏览型号L8567的Datasheet PDF文件第5页浏览型号L8567的Datasheet PDF文件第6页浏览型号L8567的Datasheet PDF文件第7页 
Data Sheet  
August 1999  
L8567 SLIC for  
People’s Republic of China Applications  
Features  
Description  
Low active power (typical 149 mW during on-hook  
transmission)  
General  
This electronic subscriber loop interface circuit  
(SLIC) is optimized for low cost and low power con-  
sumption while providing a full-feature set.  
Sleep state for low idle power (47 mW typical)  
Quiet tip/ring polarity reversal  
Distortion-free on-hook transmission  
–35 V to –65 V battery operation  
Included in the feature set is quiet reverse battery.  
Quiet polarity reversal is possible because the ac  
path is uninterrupted during transmission. The dc  
loop current limit is user-adjustable via a single exter-  
nal resistor. The maximum battery voltage is speci-  
fied as –65 V for long loop applications. The L8567  
supports on-hook transmission.  
Convenient operating states:  
— Forward active  
— Polarity reversal active  
— Sleep  
— Forward disconnect  
The total short loop off-hook power may be reduced  
by use of a lower-voltage auxiliary battery supply. If,  
when using the 32-pin PLCC, the user does not wish  
to supply an auxiliary battery, the component of the  
total short loop off-hook power that is dissipated on  
the L8567 SLIC is controlled by use of an external  
power resistor. With the 44-pin PLCC, a power resis-  
tor is not necessary.  
Supervision functions:  
— Fixed threshold off-hook detector with  
longitudinal rejection and hysteresis  
— Ring trip detector  
— Thermal shutdown indication  
Adjustable loop current limit  
Three driver outputs for relay driver  
LED driver output to indicate off-hook  
Latched parallel data interface  
Included are both the loop closure and ring trip  
supervision functions. The loop closure threshold is  
fixed internally, which eliminates the need for an  
external precision resistor to set the threshold. To  
minimize noise at the supervision output, hysteresis  
is included on the loop closure function. The loop clo-  
sure and ring trip outputs are multiplexed into a sin-  
gle NSTAT output. Also included is a thermal  
shutdown mechanism. If device temperature exceeds  
165 °C, as may be the case under an extended  
power cross fault, the SLIC will shut down (i.e., enter  
a high-impedance state) to provide protection against  
the fault. A logic output will indicate the SLIC is in  
thermal shutdown.  
Battery and +5 V required:  
— Optional auxiliary lower voltage battery to  
reduce short loop power  
–40 °C to +85 °C operational temperature range  
User-selectable power management techniques  
Thermal protection  
32-pin PLCC or 44-pin PLCC packaging  
 
 

与L8567相关器件

型号 品牌 获取价格 描述 数据表
L8567-32PLCC ETC

获取价格

Telecommunication IC
L8567-44PLCC ETC

获取价格

Telecommunication IC
L8574D AGERE

获取价格

L8574D Resistive Subscriber Line Interface Circuit(SLIC), Ring Relay,and Protector(SRP)for
L8575 AGERE

获取价格

Dual-Resistive,Low-Cost Subscriber Line Interface Circuit(SLIC)
L8576B AGERE

获取价格

Dual Ringing SLIC
L8581 ETC

获取价格

Telecomm/Datacomm
L8-5-SERIES ETC

获取价格

Interface IC
L8600 UTC

获取价格

Analog Circuit, PDSO20
L8601-01 HAMAMATSU

获取价格

90KV MICROFOCUS X-RAY SOURCE
L8602 UTC

获取价格

LOW POWER 6 STAGE FET LNA AND MIXER BIAS CONTROLLER