AllꢀRead,ꢀWriteꢀandꢀDeselectꢀcyclesꢀareꢀinitiatedꢀbyꢀtheADVꢀ
®
Long-term Support
World Class Quality
IS61NLP25636B/IS61NVP/NVVP25636B
IS61NLP51218B/IS61NVP/NVVP51218B
256K x 36 and 512K x 18
AUGUST 2019
9Mb, PIPELINE 'NO WAIT' STATE BUS SRAM
FEATURES
DESCRIPTION
Theꢀ9ꢀMegꢀproductꢀfamilyꢀfeaturesꢀhigh-speed,ꢀlow-powerꢀ
synchronousꢀstaticꢀRAMsꢀdesignedꢀtoꢀprovideꢀaꢀburstable,ꢀ
high-performance,ꢀ'noꢀwait'ꢀstate,ꢀdeviceꢀforꢀnetworkingꢀandꢀ
communicationsꢀapplications.ꢀTheyꢀareꢀorganizedꢀasꢀ256Kꢀ
wordsꢀbyꢀ36ꢀbitsꢀandꢀ512Kꢀꢀwordsꢀbyꢀ18ꢀbits,ꢀfabricatedꢀ
withꢀISSI'sꢀadvancedꢀCMOSꢀtechnology.
•ꢀ 100ꢀpercentꢀbusꢀutilization
•ꢀ NoꢀwaitꢀcyclesꢀbetweenꢀReadꢀandꢀWrite
•ꢀ Internalꢀself-timedꢀwriteꢀcycle
•ꢀ IndividualꢀByteꢀWriteꢀControl
•ꢀ SingleꢀR/Wꢀ(Read/Write)ꢀcontrolꢀpin
Incorporatingꢀ aꢀ 'noꢀ wait'ꢀ stateꢀ feature,ꢀ waitꢀ cyclesꢀ areꢀ
eliminatedꢀwhenꢀtheꢀbusꢀswitchesꢀfromꢀreadꢀtoꢀwrite,ꢀorꢀ
writeꢀtoꢀread.ꢀThisꢀdeviceꢀintegratesꢀaꢀ2-bitꢀburstꢀcounter,ꢀ
high-speedꢀSRAMꢀcore,ꢀandꢀhigh-driveꢀcapabilityꢀoutputsꢀ
intoꢀaꢀsingleꢀmonolithicꢀcircuit.
•ꢀ Clockꢀcontrolled,ꢀregisteredꢀaddress,ꢀꢀ
dataꢀandꢀcontrol
ꢀ
•ꢀ Interleavedꢀorꢀlinearꢀburstꢀsequenceꢀcontrolꢀus-
ingꢀMODEꢀinputꢀ
Allꢀsynchronousꢀinputsꢀpassꢀthroughꢀregistersꢀareꢀcontrolledꢀ
byꢀaꢀpositive-edge-triggeredꢀsingleꢀclockꢀinput.ꢀOperationsꢀ
mayꢀbeꢀsuspendedꢀandꢀallꢀsynchronousꢀinputsꢀignoredꢀ
whenꢀClockꢀEnable,ꢀCKEꢀisꢀHIGH.ꢀInꢀthisꢀstateꢀtheꢀinternalꢀ
deviceꢀwillꢀholdꢀtheirꢀpreviousꢀvalues.
•ꢀ Threeꢀchipꢀenablesꢀforꢀsimpleꢀdepthꢀexpansionꢀ
andꢀaddressꢀpipelining
•ꢀ PowerꢀDownꢀmode
•ꢀ Commonꢀdataꢀinputsꢀandꢀdataꢀoutputs
•ꢀ CKEꢀpinꢀtoꢀenableꢀclockꢀandꢀsuspendꢀoperation
input.ꢀWhenꢀtheꢀADVꢀisꢀHIGHꢀtheꢀinternalꢀburstꢀcounterꢀ
isꢀincremented.ꢀNewꢀexternalꢀaddressesꢀcanꢀbeꢀloadedꢀ
whenꢀADVꢀisꢀLOW.
•ꢀ JEDECꢀ100-pinꢀQFP,ꢀ165-ballꢀBGAꢀandꢀ119-ballꢀ
BGAꢀpackages
Writeꢀ cyclesꢀ areꢀ internallyꢀ self-timedꢀ andꢀ areꢀ initiatedꢀ
byꢀtheꢀrisingꢀedgeꢀofꢀtheꢀclockꢀinputsꢀandꢀwhenꢀWEꢀisꢀ
LOW.ꢀSeparateꢀbyteꢀenablesꢀallowꢀindividualꢀbytesꢀtoꢀbeꢀ
written.
•ꢀ Powerꢀsupply:
NLP:ꢀVddꢀ3.3Vꢀ(±ꢀ5%),ꢀVddqꢀ3.3V/2.5Vꢀ(±ꢀ5%)
ꢀ NVP:ꢀVdd 2.5Vꢀ(±ꢀ5%),ꢀVddqꢀ2.5Vꢀ(±ꢀ5%)
ꢀ NVVP:ꢀVdd 1.8Vꢀ(±ꢀ5%),ꢀVddqꢀ1.8Vꢀ(±ꢀ5%)
•ꢀ JTAGꢀBoundaryꢀScanꢀforꢀBGAꢀpackages
•ꢀ Industrialꢀtemperatureꢀavailable
ꢀAꢀburstꢀmodeꢀpinꢀ(MODE)ꢀdefinesꢀtheꢀorderꢀofꢀtheꢀburstꢀ
sequence.ꢀWhenꢀtiedꢀHIGH,ꢀtheꢀinterleavedꢀburstꢀsequenceꢀ
isꢀselected.ꢀWhenꢀtiedꢀLOW,ꢀtheꢀlinearꢀburstꢀsequenceꢀisꢀ
selected.
•ꢀ Lead-freeꢀavailable
FAST ACCESS TIME
Symbol
Parameter
-250
2.6ꢀ
4ꢀ
-200
3.1ꢀ
5ꢀ
-166
3.5ꢀ
6ꢀ
Units
ns
ꢀ
ꢀ
ꢀ
tkqꢀ
tkcꢀ
ꢀ
ClockꢀAccessꢀTimeꢀ
CycleꢀTimeꢀ
ns
Frequencyꢀ
250ꢀ
200ꢀ
166ꢀ
MHz
Copyright © 2019 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no
liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest version of this device specification before relying on
any published information and before placing orders for products.
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause
failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written
assurance to its satisfaction, that:
a.) the risk of injury or damage has been minimized;
b.) the user assume all such risks; and
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774
1
Rev. A4
07/19/2019