IDT74FCT162501ETPF

更新时间： 2024-10-27 23:12:47

品牌	Logo	应用领域
艾迪悌 - IDT		总线驱动器总线收发器触发器逻辑集成电路电视光电二极管输出元件
页数	文件大小	规格书
9页	144K
描述
FAST CMOS 18-BIT REGISTERED TRANSCEIVER

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

IDT74FCT162501ETPF 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	SSOP	包装说明：	0.40 MM PITCH, TVSOP-56
针数：	56	Reach Compliance Code：	not_compliant
风险等级：	5.88	Is Samacsys：	N
其他特性：	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION	控制类型：	INDEPENDENT CONTROL
计数方向：	BIDIRECTIONAL	系列：	FCT
JESD-30 代码：	R-PDSO-G56	JESD-609代码：	e0
长度：	11.3 mm	逻辑集成电路类型：	REGISTERED BUS TRANSCEIVER
最大I（ol）：	0.024 A	湿度敏感等级：	1
位数：	18	功能数量：	1
端口数量：	2	端子数量：	56
最高工作温度：	85 °C	最低工作温度：	-40 °C
输出特性：	3-STATE WITH SERIES RESISTOR	输出极性：	TRUE
封装主体材料：	PLASTIC/EPOXY	封装代码：	TSSOP
封装等效代码：	TSSOP56,.25,16	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	电源：	5 V
Prop。Delay @ Nom-Sup：	3.8 ns	传播延迟（tpd）：	4.2 ns
认证状态：	Not Qualified	座面最大高度：	1.2 mm
子类别：	Bus Driver/Transceivers	最大供电电压 (Vsup)：	5.5 V
最小供电电压 (Vsup)：	4.5 V	标称供电电压 (Vsup)：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Tin/Lead (Sn85Pb15)
端子形式：	GULL WING	端子节距：	0.4 mm
端子位置：	DUAL	翻译：	N/A
触发器类型：	POSITIVE EDGE	宽度：	4.4 mm
Base Number Matches：	1

IDT74FCT162501ETPF 数据手册

浏览型号IDT74FCT162501ETPF的Datasheet PDF文件第2页

浏览型号IDT74FCT162501ETPF的Datasheet PDF文件第3页

浏览型号IDT74FCT162501ETPF的Datasheet PDF文件第4页

浏览型号IDT74FCT162501ETPF的Datasheet PDF文件第5页

浏览型号IDT74FCT162501ETPF的Datasheet PDF文件第6页

浏览型号IDT74FCT162501ETPF的Datasheet PDF文件第7页

IDT54/74FCT16501AT/CT/ET

IDT54/74FCT162501AT/CT/ET

IDT54/74FCT162H501AT/CT/ET

FAST CMOS

18-BIT REGISTERED

TRANSCEIVER

Integrated Device Technology, Inc.

CMOS technology. These high-speed, low-power 18-bit reg-

istered bus transceivers combine D-type latches and D-type

flip-flopstoallowdataflowintransparent, latchedandclocked

modes. Data flow in each direction is controlled by output-

enable (OEAB and OEBA), latch enable (LEAB and LEBA)

and clock (CLKAB and CLKBA) inputs. For A-to-B data flow,

thedeviceoperatesintransparentmodewhenLEABisHIGH.

When LEAB is LOW, the A data is latched if CLKAB is held at

a HIGH or LOW logic level. If LEAB is LOW, the A bus data

isstoredinthelatch/flip-flopontheLOW-to-HIGHtransitionof

CLKAB. OEAB is the output enable for the B port. Data flow

fromtheBporttotheAportissimilarbutrequiresusing OEBA,

LEBA and CLKBA. Flow-through organization of signal pins

simplifies layout. All inputs are designed with hysteresis for

improved noise margin.

FEATURES:

• Common features:

– 0.5 MICRON CMOS Technology

– High-speed, low-power CMOS replacement for

ABT functions

– Typical tSK(o) (Output Skew) < 250ps

– Low input and output leakage ≤ 1µA (max.)

– ESD > 2000V per MIL-STD-883, Method 3015;

> 200V using machine model (C = 200pF, R = 0)

– Packages include 25 mil pitch SSOP, 19.6 mil pitch

TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack

– Extended commercial range of -40°C to +85°C

• Features for FCT16501AT/CT/ET:

– High drive outputs (-32mA IOH, 64mA IOL)

– Power off disable outputs permit “live insertion”

– Typical VOLP (Output Ground Bounce) < 1.0V at

VCC = 5V, TA = 25°C

The FCT16501AT/CT/ET are ideally suited for driving

high-capacitance loads and low-impedance backplanes. The

output buffers are designed with power off disable capability

to allow "live insertion" of boards when used as backplane

drivers.

• Features for FCT162501AT/CT/ET:

– Balanced Output Drivers: ±24mA (commercial),

±16mA (military)

The FCT162501AT/CT/ET have balanced output drive

with current limiting resistors. This offers low ground bounce,

minimalundershoot,andcontrolledoutputfalltimes–reducing

the need for external series terminating resistors. The

FCT162501AT/CT/ET are plug-in replacements for the

FCT16501AT/CT/ET and ABT16501 for on-board bus inter-

face applications.

– Reduced system switching noise

– Typical VOLP (Output Ground Bounce) < 0.6V at

VCC = 5V,TA = 25°C

• Features for FCT162H501AT/CT/ET:

– Bus Hold retains last active bus state during 3-state

– Eliminates the need for external pull up resistors

The FCT162H501AT/CT/ET have "Bus Hold" which re-

tains the input's last state whenever the input goes to high

impedance. This prevents "floating" inputs and eliminates the

need for pull-up/down resistors.

DESCRIPTION:

The FCT16501AT/CT/ET and FCT162501AT/CT/ET 18-

bitregisteredtransceiversarebuiltusingadvanceddualmetal

FUNCTIONAL BLOCK DIAGRAM

OEAB

CLKBA

LEBA

OEBA

CLKAB

LEAB

TO 17 OTHER CHANNELS

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

2547 drw 01

MILITARY AND COMMERCIAL TEMPERATURE RANGES

AUGUST 1996

1996 Integrated Device Technology, Inc.

5.10

DSC-2547/8

12 3 4 5 6 7...9

中文翻译

下载PDF

与IDT74FCT162501ETPF相关器件

型号	品牌	获取价格	描述	数据表
IDT74FCT162501ETPFB	IDT	获取价格	FAST CMOS 18-BIT REGISTERED TRANSCEIVER
IDT74FCT162501ETPV	IDT	获取价格	FAST CMOS 18-BIT REGISTERED TRANSCEIVER
IDT74FCT162501ETPVB	IDT	获取价格	FAST CMOS 18-BIT REGISTERED TRANSCEIVER
IDT74FCT162511AT	IDT	获取价格	FAST CMOS 16-BIT REGISTERED/LATCHED TRANSCEIVER WITH PARITY
IDT74FCT162511ATE	IDT	获取价格	FAST CMOS 16-BIT REGISTERED/LATCHED TRANSCEIVER WITH PARITY
IDT74FCT162511ATEB	IDT	获取价格	FAST CMOS 16-BIT REGISTERED/LATCHED TRANSCEIVER WITH PARITY
IDT74FCT162511ATEG	IDT	获取价格	Registered Bus Transceiver, FCT Series, 1-Func, 16-Bit, True Output, CMOS, CDFP56, 0.635 M
IDT74FCT162511ATPA	IDT	获取价格	FAST CMOS 16-BIT REGISTERED/LATCHED TRANSCEIVER WITH PARITY
IDT74FCT162511ATPAB	IDT	获取价格	FAST CMOS 16-BIT REGISTERED/LATCHED TRANSCEIVER WITH PARITY
IDT74FCT162511ATPF	IDT	获取价格	FAST CMOS 16-BIT REGISTERED/LATCHED TRANSCEIVER WITH PARITY

与IDT74FCT162501ETPF相关文章

三星深化印度制造布局，供应链本地化进程加速
2024-10-29

13
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

13
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
2024-10-18

40
意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

47

产品中心

服务支持

精选活动

关于我们

帮助中心

IDT74FCT162501ETPF

IDT74FCT162501ETPF 技术参数

IDT74FCT162501ETPF 数据手册

与IDT74FCT162501ETPF相关器件

与IDT74FCT162501ETPF相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

IDT74FCT162501ETPF

IDT74FCT162501ETPF 技术参数

IDT74FCT162501ETPF 数据手册

与IDT74FCT162501ETPF相关器件

与IDT74FCT162501ETPF相关文章

您还可以找

您在本页遇到什么问题？