HSP45106
Data Sheet
October 1999
File Number 2809.5
16-Bit Numerically Controlled Oscillator
Features
The Intersil HSP45106 is a high performance 16-bit
quadrature Numerically Controlled Oscillator (NCO16). The
NCO16 simplifies applications requiring frequency and
phase agility such as frequency-hopped modems, PSK
modems, spread spectrum communications, and precision
signal generators. As shown in the block diagram, the
HSP45106 is divided into a Phase/Frequency Control
Section (PFCS) and a Sine/Cosine Section.
• 25.6MHz, 33MHz Versions
• 32-Bit Center and Offset Frequency Control
• 16-Bit Phase Control
• 8 Level PSK Supported Through Three Pin Interface
• Simultaneous 16-Bit Sine and Cosine Outputs
• Output in Two’s Complement or Offset Binary
• <0.008Hz Tuning Resolution at 33MHz
• Serial or Parallel Outputs
The inputs to the Phase/Frequency Control Section consist
of a microprocessor interface and individual control lines.
The frequency resolution is 32 bits, which provides for
resolution of better than 0.008Hz at 33MHz. User
• Spurious Frequency Components <-90dBc
• 16-Bit Microprocessor Compatible Control Interface
programmable center frequency and offset frequency
registers give the user the capability to perform phase
coherent switching between two sinusoids of different
frequencies. Further, a programmable phase control register
Applications
o
• Direct Digital Synthesis
allows for phase control of better than 0.006 . In applications
requiring up to 8-level PSK, three discrete inputs are
provided to simplify implementation.
• Quadrature Signal Generation
• Spread Spectrum Communications
• PSK Modems
The output of the PFCS is a 28-bit phase which is input to
the Sine/Cosine Section for conversion into sinusoidal
amplitude. The outputs of the Sine/Cosine Section are two
16-bit quadrature signals. The spurious free dynamic range
of this complex vector is greater than 90dBc.
• Modulation - FM, FSK, PSK (BPSK, QPSK, 8PSK)
• Frequency Hopping Communications
• Precision Signal Generation
For added flexibility when using the NCO16 in conjunction
with DAC’s, a choice of either parallel or serial outputs with
either two’s complement or offset binary encoding is
provided. In addition, a synchronization signal is available
which indicates serial word boundaries.
• Related Products
- Use with Data Acquisition Parts HI5731 or HI5741
Ordering Information
TEMP.
o
PART NUMBER RANGE ( C)
PACKAGE
84 Ld PLCC
84 Ld PLCC
84 Ld PLCC
85 Ld CPGA
PKG. NO.
N84.1.15
N84.1.15
N84.1.15
G85.A
HSP45106JC-25
HSP45106JI-25
HSP45106JC-33
HSP45106GC-33
0 to 70
-40 to 85
0 to 70
0 to 70
Block Diagram
SIN/COS
ARGUMENT
MICROPROCESSOR
16
16
INTERFACE
SINE
PHASE/
FREQUENCY
CONTROL
32
SINE/
COSINE
SECTION
CLOCK
COSINE
SECTION
DISCRETE
CONTROL SIGNALS
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 407-727-9207 | Copyright © Intersil Corporation 1999
1