HIP6301V, HIP6302V
®
Data Sheet
December 27, 2004
FN9034.2
Microprocessor CORE Voltage Regulator
Multi-Phase Buck PWM Controller
Features
• Multi-Phase Power Conversion
The HIP6301V and HIP6302V control microprocessor core
voltage regulation by driving up to four synchronous-rectified
buck channels in parallel. Multi-phase buck converter
architecture uses interleaved timing to multiply ripple
frequency and reduce input and output ripple currents.
Lower ripple results in fewer components, lower component
cost, reduced power dissipation, and smaller implementation
area. The HIP6301V is a versatile two to four phase
controller and the HIP6302V is a cost-saving dedicated
two-phase controller.
• Precision CORE Voltage Regulation
- ±0.8% System Accuracy Over Temperature
• Microprocessor Voltage Identification Input
- Dynamic-VID Technology
- 5-Bit VID Decoder
• Precision Channel-Current Balance
• Overcurrent Protection
• Lossless Current Sensing
The HIP6301V and HIP6302V are exact pin compatible
replacements for their predecessor parts, the HIP6301 and
HIP6302. They are the first controllers to incorporate
Dynamic VID™ technology to manage the output voltage
and current during on-the-fly DAC changes. Using Dynamic
VID, the HIP6301V and HIP6302V detect changes in the VID
code and gradually change the reference in 25mV
• Programmable “Droop” Voltage
• Fast Transient Response
• Selection of 2, 3, or 4 Phase Operation
• High Ripple Frequency (100kHz to 6MHz)
• Pb-Free Available (RoHS Compliant)
increments until reaching the new value. By gradually
changing the reference setting, inrush current and the
accompanying voltage swings remain negligibly small.
Ordering Information
PKG. DWG.
#
o
Intersil offers a wide range of MOSFET drivers to form highly
integrated solutions for high-current, high slew-rate
applications. The HIP6301V and HIP6302V regulate output
voltage, balance load currents and provide protective
functions for two to four synchronous-rectified buck converter
channels. These parts feature an integrated high-bandwidth
error amplifier for fast, precise regulation and a five-bit DAC
for the digital interface to program the 0.8% accuracy. A
window comparator toggles PGOOD if the output voltage
moves out of range and acts to protect the load in case of
over voltage.
PART NUMBER
TEMP. ( C)
PACKAGE
HIP6301VCB
0 to 70
20 Ld SOIC
M20.3
M20.3
HIP6301VCBZ
(See Note)
0 to 70
20 Ld SOIC
(Pb-free)
HIP6301VCBZA
(See Note)
0 to 70
20 Ld SOIC
(Pb-free)
M20.3
HIP6302VCB
0 to 70
0 to 70
16 Ld SOIC
M16.15
M16.15
HIP6302VCBZ
(See Note)
16 Ld SOIC
(Pb-free)
Add “-T” suffix for tape and reel.
Current sensing is accomplished by reading the voltage
developed across the lower MOSFETs during their
conduction intervals. Current sensing provides the needed
signals for precision droop, channel-current balancing, load
sharing, and over-current protection. This saves cost by
taking advantage of the power device’s parasitic on
resistance.
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002, 2004. All Rights Reserved
1
Dynamic VID™ is a trademark of Intersil Americas Inc.